Smoked and Stealth Corners...Tons o Pics...
7/3/08, 12:37 AM
#81
Shelby GT350 Member
7/3/08, 10:42 AM
#82
Legacy TMS Member
B
BSemper Fi
7/3/08, 11:12 AM
#83
Cobra Member
Interesting, yours like others I've seen are stamped "DOT" yet non had amber reflectors in them. I'm wondering if that is no longer a requirement or the offshore manufacturers are just putting on the DOT lettering without complying? I'll have to research the DOT web site.
BB
Semper Fi
B
BSemper Fi
Certain states allow white reflectors (asked a CT state trooper), but A reflector is needed on the front which I do not see in those black housings.
7/3/08, 12:08 PM
#84
Legacy TMS Member
Did some light reading on the subject. 
FMCSA 393.7 and FMCSA Regulation 571.108 on the subject of reflex reflectors. The requirement for our vehicles is that there be a red reflector on each side of the vehicle to the rear of the rear wheels and an amber reflector on each side in front of the front wheels. All have to be at a minimum of 15" above the ground. They have to comply with SAE J594 and unfortunately you have to pay upwards of $60 to see that document. So the clear rear marker covers and the clear front corner covers are only legal if they reflect red and amber respectively and the color has to comply to SAE J578.
I also read a ruling from DOT that while clear rear brake lights are illegal, unless they are OEM, clear front turn signals are legal. The reasoning was that there are amber turn signal bulbs that comply to the color requirements of SAE J578 but there have been no red rear bulbs that comply. Yet if the front corner lamps are the only front reflective area then they still have to reflect amber to meet SAE J594 requirements.
Interesting as well is the "DOT" marks on the lamps. This is a voluntary marking which only means that the manufacturer understands the regulations and has complied. It does not mean that the DOT has inspected and approved these devices. Knowing the adherence to both copyright and patents that the Chinese have followed you can rest assured that everything is to code, NOT.
P.S. The clear brake lights referred to above were those with incandecent bulbs. Clear rear taillights with LEDs are compliant if they contain red reflex reflectors which adhere to the colors specified by SAE J594. There must be two reflectors per side.
Caveat Emptor
BB
Semper Fi
FMCSA 393.7 and FMCSA Regulation 571.108 on the subject of reflex reflectors. The requirement for our vehicles is that there be a red reflector on each side of the vehicle to the rear of the rear wheels and an amber reflector on each side in front of the front wheels. All have to be at a minimum of 15" above the ground. They have to comply with SAE J594 and unfortunately you have to pay upwards of $60 to see that document. So the clear rear marker covers and the clear front corner covers are only legal if they reflect red and amber respectively and the color has to comply to SAE J578. I also read a ruling from DOT that while clear rear brake lights are illegal, unless they are OEM, clear front turn signals are legal. The reasoning was that there are amber turn signal bulbs that comply to the color requirements of SAE J578 but there have been no red rear bulbs that comply. Yet if the front corner lamps are the only front reflective area then they still have to reflect amber to meet SAE J594 requirements.
Interesting as well is the "DOT" marks on the lamps. This is a voluntary marking which only means that the manufacturer understands the regulations and has complied. It does not mean that the DOT has inspected and approved these devices. Knowing the adherence to both copyright and patents that the Chinese have followed you can rest assured that everything is to code, NOT.
P.S. The clear brake lights referred to above were those with incandecent bulbs. Clear rear taillights with LEDs are compliant if they contain red reflex reflectors which adhere to the colors specified by SAE J594. There must be two reflectors per side.
Caveat Emptor
B
BSemper Fi
Last edited by Centurion96; 7/3/08 at 09:36 PM. Reason: addendum
7/4/08, 06:07 PM
#85
FR500 Member
Join Date: July 1, 2008
Location: Oxford, UK
Posts: 3,336
Likes: 0
Received 0 Likes
on
0 Posts
There are no DOT or SAE logos on lamp housing. You do know I'm running stealth bulbs though, right? When activated, they are quite bright and very amber. Passed inspection with them no problem and can't imagine with so many others running the same set up as me that if they were illegal there wouldn't be a post about it by now.
7/4/08, 08:43 PM
#87
Cobra Member
Bob,
I got mine off ebay.
Shop around though, I've seen the same one from 26-48.
Got mine for 27 + shipping.
1 link;
http://cgi.ebay.com/ebaymotors/05-06...QQcmdZViewItem
another;
http://cgi.ebay.com/ebaymotors/05-06...QQcmdZViewItem
I got mine off ebay.
Shop around though, I've seen the same one from 26-48.
Got mine for 27 + shipping.
1 link;
http://cgi.ebay.com/ebaymotors/05-06...QQcmdZViewItem
another;
http://cgi.ebay.com/ebaymotors/05-06...QQcmdZViewItem
Last edited by aircare84; 7/4/08 at 08:55 PM.
7/5/08, 05:49 AM
#88
I tried to copy the listing and paste it but for some reason it isn't showing. Look for item number 310063790106
Listed in category: eBay Motors > Parts & Accessories > Car & Truck Parts > Lighting & Lamps > Turn Signals
the paste link worked finally
http://cgi.ebay.com/ebaymotors/05-06...3911.m14.l1318
8/25/08, 05:45 PM
#90
Team Mustang Source
Join Date: September 16, 2005
Location: Yatta-Abba, AL
Posts: 1,705
Likes: 0
Received 2 Likes
on
2 Posts
Well My Redfire has gone bye-bye. And with it all my mods. Soooooo, now I get to start all over again with my new BLACK Bullitt. There was no need to take the clear corner's off, as I want smoked/black. One thing is definate. THose UGLY amber ones are going FIRST!. Now the decision.....Smoked or Black???????
9/14/08, 02:02 PM
#93
Mach 1 Member
Just got done intalling my clear corners and stealth bulbs that I ordered from stangmods.com and I must say this write up was a big help. Thanks for taking the time and effort to make this!
Thread
Thread Starter
Forum
Replies
Last Post
JonathonK
2005-2009 Mustang
2
9/19/15 03:19 AM