Sequential turn signal mod!
V6 Member
Joined: January 14, 2005
Posts: 60
Likes: 0
I bought from this very same sale and mine came out working fine. The yellow wires were just enough I wish they were a little longer. He was not over friendly with me and shipping was ok or a little slow for my taste. I never got a firm date it was shipped on so I dont know if it was him or the post office. I ask about the brake lights as my brother has a set from some one else and i wanted mine to work the same. He told me that the brake lights worked normal. But when I got them in they worked just like I wanted. This is a mom and pop operation for sure, but I am happy with mine.
Later Ed
Later Ed
Thread Starter
GT Member
Joined: March 24, 2005
Posts: 180
Likes: 0
Yah, I agree. Shipping was slow. I think he should have added extra yellow wires, cause one of mine actually broke to begin with, so I had to send the kit back anyways. He sent me the wrong connectors at the beginning. Im just glad to have them working.
Cobra Member
Joined: March 30, 2005
Posts: 1,122
Likes: 0
Originally posted by JHL981@April 23, 2005, 3:16 AM
Im pissed, so I bought a turn signal sequencer kit off e-bay. I cant afford the plug n play ones. So I bought the one that requires a few crimps and such since I got it for a good price at $48.00 with best offer. Well, FIRST, they sent me the wrong kit, it had male square ends and female oval ends. After I installed the darn thing. So I take it all apart. And send it back. Finally a week later, I get it back. They sent the right kit, yay. I install it. And the inboard light doesnt flash. I check all my connection. They are good. I play with one of the wires that plugs in to the inboard light, and the light flashes for a moment. So I tinker with it, its in all the way, and still nothing. Now im starting to frey the wire. So here I am, still with the uncompleted mod, my trunk tore apart since I spent an hour trying to get it to work. I e-mailed the guy again, I dont know what to do. I have to take apart everything again. What a PITA. The only thing not stopping me from leaving negative feedback is the fact that they are friendly. Im so mad right now. Anywho, id spend the extra $100 and get the plug n play, this whole easier kit is a load of crap. Sorry had to vent. Here is the link to my sale.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWN%3AIT
:notnice: :notnice:
His history is 100%, but I think im going to leave neutral feedback.
Im pissed, so I bought a turn signal sequencer kit off e-bay. I cant afford the plug n play ones. So I bought the one that requires a few crimps and such since I got it for a good price at $48.00 with best offer. Well, FIRST, they sent me the wrong kit, it had male square ends and female oval ends. After I installed the darn thing. So I take it all apart. And send it back. Finally a week later, I get it back. They sent the right kit, yay. I install it. And the inboard light doesnt flash. I check all my connection. They are good. I play with one of the wires that plugs in to the inboard light, and the light flashes for a moment. So I tinker with it, its in all the way, and still nothing. Now im starting to frey the wire. So here I am, still with the uncompleted mod, my trunk tore apart since I spent an hour trying to get it to work. I e-mailed the guy again, I dont know what to do. I have to take apart everything again. What a PITA. The only thing not stopping me from leaving negative feedback is the fact that they are friendly. Im so mad right now. Anywho, id spend the extra $100 and get the plug n play, this whole easier kit is a load of crap. Sorry had to vent. Here is the link to my sale.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWN%3AIT
:notnice: :notnice:
His history is 100%, but I think im going to leave neutral feedback.
Mach 1 Member
Joined: November 15, 2004
Posts: 683
Likes: 0
From: Victoria BC
Just got my kit in the mail today so I'm heading out with my crimper to get started. Just to review though, the brake lights still work normally after install? I don't need pulsing brake lights to attract the wrong kind of attention (read: police)... they already hate the car just because "it looks fast". 
Mach 1 Member
Joined: November 15, 2004
Posts: 683
Likes: 0
From: Victoria BC
OK, installation went really well and took the better part of 1/2 hour. Had to reverse the red connectors to get them sequencing properly but now they work fine. Plus, the brake lights don't pulse! Well, they do once and then stay on solid. Too easy! 
The only cheesy part is the t-connector that clips onto the ground wires. I think I'll go back and solder ithem on properly when the weekend rolls around.
The only cheesy part is the t-connector that clips onto the ground wires. I think I'll go back and solder ithem on properly when the weekend rolls around.
Former Vendor
Joined: November 28, 2004
Posts: 51
Likes: 0
Originally posted by darth-bob@April 26, 2005, 10:10 AM
Do you have to run wires to the front of the car?
Do you have to run wires to the front of the car?
-L
P.S. Those stripes look nice. Did you do them yourself?
GT Member
Joined: September 24, 2004
Posts: 125
Likes: 0
i ordered my web products one yesterday so as soon as it gets here its in I have heard nothing but good things with this kit. and so so comments with cdc and alot of bad things from the ebay auction. YOU GET WHAT YOU PAY FOR
Thread
Thread Starter
Forum
Replies
Last Post
austin101385
'10-14 Shelby Mustangs
3
Oct 2, 2015 01:00 PM
