Got some HID's on the 05
#166
Cobra Member
Join Date: May 17, 2007
Location: Texa$
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
Its not to hard to hook up these VVME HID conversion kits, I've done a few and no big deal so far. I just taped into the factory wiring/connector as I did not want to cut the connector off in case I wanted to restore to original. Curious though as to why the hi/low would stop working...................Do you have a bad relay or loose connected relay?
#169
headlights and foglights are worknig as HID's baby
the hi/low connector isnt worknig right however. i hear it click, but the balalsts arent moving anymore. anyone got any ideas?
the hi/low connector isnt worknig right however. i hear it click, but the balalsts arent moving anymore. anyone got any ideas?
#170
Team Mustang Source
Join Date: April 30, 2004
Location: Maryland
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
#171
no problem. i got em worknig anyweay. involved adding in a relay that wasnt suppliedwith the kit, and using the other headlight connector that wasnt used for the headlight kit
#172
Team Mustang Source
Join Date: April 30, 2004
Location: Maryland
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Mind taking photos of yourset up? I'm planning on doing this next year when I get my Tax returns
#173
Team Mustang Source
I've got a similar problem, but only on the driver's side. Passenger side flips fine, driver's side doesn't twitch (it was working initially). Double checked the wiring, nothing seems wrong.
#177
As for the pass side i wired the ground and power for the light ti the relay. I ran a ground from the relay to the car, and power for the relay directly to the battery. Now the pass side Foglight is pwoered as well. and your done
In retrospect, although i havent tried this to be accurate it would work, what i would do to keep the foglight switch active and worknig, is get 2 automitive relays and wire according to this crude diagram i whipped up.
VVME's are worknig fine for me
#178
sfter some quick research i found out that the link in the begging and vvme are both the same company.So preety much dosent matter which one you get they are both from the same vendor