GT Performance Mods 2005+ Mustang GT Performance and Technical Information

My quest for THE sound....

Thread Tools
 
Search this Thread
 
Old 7/5/06 | 01:03 AM
  #81  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
Originally Posted by Error404
I love the sound of my stock exhaust and flowmaster mufflers, but I don't think they are loud enough. would headers or different cats & tubing make the exhaust louder and not change the sound to much? or would all that be pretty much worthess for the cause?
Going with hi flow cats or removing them all together will greatly increase the sound, with minimal change to the tone. When I installed my headers, it actually made it quieter than it was before. However, I went in steps: stock, hi flow cats, no cats, then headers. If you're going from stock to headers, that would probably be louder overall. When I went from catless to headers, it made it quieter.
Old 7/22/06 | 05:22 PM
  #82  
Error404's Avatar
Mach 1 Member
 
Joined: December 3, 2005
Posts: 867
Likes: 0
From: Culver City
would long tubes be louder than short tube headers? I guess one of them with a high-flow cats would produce a noticably louder tone? What cats would you suggest?
Old 7/23/06 | 01:12 PM
  #83  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
Thats a good question, and I don't know the answer. I would assume that shorties would be louder than longtubes, but still quieter than the stock manifolds. Since LTs would be the most efficient and shorties being more efficient than the stock manifolds. And by "efficient" I mean providing more flow, less restriction and a more mellow sound. But if you are looking for more sound than performance, just stick with your stock manifolds and get a high flow catted mid pipe or an offroad mid pipe.

The absolute loudest I know I can get my car is with a catless x pipe and Loudmouths. However, it would be even louder if I still had the stock manifolds.

And the only experience I have had with cats is with the Bassani cats, and they were great. But Pypes also makes some, MAC and Dynatech do too, but Dynatech is not a suggested brand


ON A SIDE NOTE, my Violators arrived and now I am going to throw the X pipe back on and get these things bolted up
Old 7/23/06 | 03:53 PM
  #84  
Error404's Avatar
Mach 1 Member
 
Joined: December 3, 2005
Posts: 867
Likes: 0
From: Culver City
anyone tried the SLP X with cats?

http://www.lmperformance.com/6609/73.html

I don't want to get rid of the cats (because I'm in California) but I do want louder! I wonder, if cutting open the flowmasters and modifying the insides would be an option? I bet that would change the tone though, darn I love the tone, but not loud enough! haha!

Or just out of curiosity, what would loudmouths sound like with all the rest of the exhaust parts being stock? Would it just be louder? or would it be nasty sounding?
Old 7/23/06 | 10:04 PM
  #85  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
Search around, I have seen a clip of a Mustang running everything stock with SLPs. However, you can get a taste of that by removing your mufflers, just to get an idea of the sound.

An X pipe with high flow cats was the second thing I did after I had my MAC mufflers on for a couple months. X pipe for the louder sound, H pipe for the deeper, but not near as loud, sound. If you're running Flowmasters now, adding a catted X pipe would definitely enhance that sound.
Old 7/23/06 | 10:11 PM
  #86  
Error404's Avatar
Mach 1 Member
 
Joined: December 3, 2005
Posts: 867
Likes: 0
From: Culver City
Thanks! I think I'll give an X pipe a shot, I don't really think I want to go mufflerless, my camaro had cutouts on it, and it was pretty **** loud, it was right after the headers.

I see you listed a few brands for X pipes, are any particular X with catalytic converters brand louder or better sounding than others? or is one high flow cat and X pretty much the same as any other brand in terms of sound?

Maybe I should start a different thread on this? I think I'm deviating from the original post. I apologize about that! If I have any other questions or comments on this, I'll start a new thread.
Old 7/23/06 | 11:00 PM
  #87  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
I really don't think there would be much of a difference from one X pipe to another, other than construction and craftsmanship. I've only had the Bassani, and I can attest to its quality and fit. There are a few other companies that offer X pipes, and their designs differ a tad bit. But I wouldn't think that one would be significantly different than the other in terms of HP and sound. Just from going to the Prochamber to the X pipe, I would assume that an x pipe with a design such as this might be louder than the Bassani design. And I might be dead wrong also!

With the high flow cats, I also only have experience with the Bassanis, so as far as those go, I have no idea if some are better than others. Thats a realm that I am not even going to attempt to make any assumptions

Probably wouldn't be a bad idea opening a new thread, you'd definitely get more views from more knowledgable people. My experience is nowhere near what others is!
Old 7/25/06 | 12:28 AM
  #88  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
Got them all finished up this morning. Man I can't get over how well put together these mufflers are! They are definitely the best quality muffler that I have had yet. Even the Bassanis don't hold a candle to these.

The sound is nice and surprisingly deep, theres a little bit of the rattle can sound when you get on it, but its nothing compared to the other sounds I have heard. I really like these mufflers, still not quite what I want, but I am very happy with them
Old 7/25/06 | 04:10 PM
  #89  
CIVEStang's Avatar
V6 Member
 
Joined: May 4, 2006
Posts: 77
Likes: 0
I too just put on a set of Violators, and I love how they sound. Definitely a different sound than the Flowmasters. Our local Mustang customizing shop was very impressed with the craftsmanship of the Pypes X-Pipe and mufflers. He said they installed easier than the previous brands he has dealt with (MAC, Flowmaster, etc.).
Old 7/25/06 | 11:56 PM
  #90  
Baginoman2's Avatar
Bullitt Member
 
Joined: February 20, 2005
Posts: 258
Likes: 0
for thw love of god! please any vids of SLPs and Catted or cattless X...or even o/r H?????
Old 7/26/06 | 09:03 PM
  #91  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
Originally Posted by Baginoman2
for thw love of god! please any vids of SLPs and Catted or cattless X...or even o/r H?????
I discovered last night that my MP3 player has a built in microphone, so I am going to try and get a sound capture of my current setup Then if that turns out good, I will throw the Loudmouths back on there and get a sound capture of that madness
Old 7/26/06 | 09:14 PM
  #92  
rakkassan34's Avatar
GT Member
 
Joined: April 30, 2005
Posts: 128
Likes: 0
Originally Posted by Baginoman2
for thw love of god! please any vids of SLPs and Catted or cattless X...or even o/r H?????
Search the exhaust thread. I postes some with a catted pro chamber if that'll help.
Old 7/27/06 | 12:56 AM
  #93  
GtStallion51's Avatar
Mach 1 Member
 
Joined: September 28, 2004
Posts: 547
Likes: 0
I think this may be the best sound that I've heard ....

offroad H-Pipe and Borlas

http://s48.photobucket.com/albums/f2...IMG0699AVI.flv
Old 7/27/06 | 12:59 AM
  #94  
Error404's Avatar
Mach 1 Member
 
Joined: December 3, 2005
Posts: 867
Likes: 0
From: Culver City
Originally Posted by GtStallion51
I think this may be the best sound that I've heard ....

offroad H-Pipe and Borlas

http://s48.photobucket.com/albums/f2...IMG0699AVI.flv

that doesn't sound like a stock engine, sounds like a bit of cam in there
Old 7/27/06 | 01:11 AM
  #95  
GtStallion51's Avatar
Mach 1 Member
 
Joined: September 28, 2004
Posts: 547
Likes: 0
Originally Posted by Error404
that doesn't sound like a stock engine, sounds like a bit of cam in there

What ever it has .... thats the sound that I'm looking for ....
Old 7/27/06 | 02:44 AM
  #96  
Arizona Stang's Avatar
Member
 
Joined: May 9, 2006
Posts: 46
Likes: 0
sounds real nice
Old 7/27/06 | 02:55 PM
  #97  
Mydnyghte's Avatar
Thread Starter
Team Mustang Source
 
Joined: December 21, 2005
Posts: 165
Likes: 0
So where is a good site to upload sound clips?
Old 7/27/06 | 07:14 PM
  #98  
SonicGT's Avatar
Bullitt Member
 
Joined: August 14, 2004
Posts: 306
Likes: 0
actually i have met the guy in the video before and he has a kenne bell in it. its loud but it doesnt sound all that great in person.
Old 7/27/06 | 08:36 PM
  #99  
don_w's Avatar
 
Joined: June 22, 2005
Posts: 4,276
Likes: 1
Originally Posted by chevy_slayer
actually i have met the guy in the video before and he has a kenne bell in it. its loud but it doesnt sound all that great in person.
Yep... that's Eduardo's car.
Old 7/27/06 | 08:49 PM
  #100  
hamstang's Avatar
V6 Member
 
Joined: November 8, 2005
Posts: 73
Likes: 0
I like that. Sounds like a NASCAR Cup car I think.



All times are GMT -6. The time now is 04:05 PM.