C&l kit arrived
Thread Starter
V6 Member
Joined: January 10, 2005
Posts: 62
Likes: 0
Looks very nice 
The heat shield has a nice rubber fitting all around it to help seal it to the hood. I have to take off the stock intake when installing the charge motion plates, so I will put them on at the same time. Hope to have actual numbers up soon!!
The heat shield has a nice rubber fitting all around it to help seal it to the hood. I have to take off the stock intake when installing the charge motion plates, so I will put them on at the same time. Hope to have actual numbers up soon!!
Bullitt Member
Joined: January 31, 2004
Posts: 442
Likes: 0
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Thanks
btw have fun!!!
Thread Starter
V6 Member
Joined: January 10, 2005
Posts: 62
Likes: 0
Originally posted by ZwerRacing@February 11, 2005, 5:43 PM
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Nothing looks nicer than billet...I will take a side by side shot of the stock ones compared to Steedas when I unbolt them. I'm very interested in seeing the actual difference between the two...here's a pic
Thread Starter
V6 Member
Joined: January 10, 2005
Posts: 62
Likes: 0
Originally posted by ZwerRacing@February 11, 2005, 5:43 PM
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Nothing looks nicer than billet...I will take a side by side shot of the stock ones compared to Steedas when I unbolt them. I'm very interested in seeing the actual difference between the two...here's a pic
Thread Starter
V6 Member
Joined: January 10, 2005
Posts: 62
Likes: 0
Originally posted by ZwerRacing@February 11, 2005, 5:43 PM
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Looks nice. Seems like it should flow smoothly and flow alot of air. Hope to hear about the install and the performance soon. Also did you say you got the charge motion control plates from steeda? How do thoes look and tell us about them as soon as you install them.
Thanks
btw have fun!!!
Nothing looks nicer than billet...I will take a side by side shot of the stock ones compared to Steedas when I unbolt them. I'm very interested in seeing the actual difference between the two...here's a pic
Thread Starter
V6 Member
Joined: January 10, 2005
Posts: 62
Likes: 0
They look sweet...I will take a pic of the stock one versus the new ones once I get them unbolted. I'm very interested to see just how "restrictive" the stock ones are compared to these. Here's a pic
I don't know what that was all about....
Cobra Member
Joined: December 18, 2004
Posts: 1,415
Likes: 0
Neat stuff - I'd really like your results with the Steeda Chargeback plates. Any chance you can dyno with just the charge plates and see what increase they give you b4 the CAI system is installed?
By the way - I bet once those toes are installed your Stang is going to REALLY fast!!
By the way - I bet once those toes are installed your Stang is going to REALLY fast!!
V6 Member
Joined: October 6, 2004
Posts: 87
Likes: 0
Originally posted by steal101@February 11, 2005, 6:30 PM
Get that installed so we can see it!
Get that installed so we can see it!
I didn't buy it to sit on the floor
Cobra Member
Joined: May 17, 2004
Posts: 1,476
Likes: 0
That kit look's awsome! I think making the heatshield seal to the top of the hood is really gona help. That's how I'm going to flow air through the scoop's in the hood I'm building! I love it when a plan comes together! (Puffs cigar)
I love it when a plan comes together! (Puffs cigar)
V6 Member
Joined: October 6, 2004
Posts: 87
Likes: 0
Originally posted by Vegasjay@February 11, 2005, 7:02 PM
That kit look's awsome! I think making the heatshield seal to the top of the hood is really gona help. That's how I'm going to flow air through the scoop's in the hood I'm building! I love it when a plan comes together! (Puffs cigar)
That kit look's awsome! I think making the heatshield seal to the top of the hood is really gona help. That's how I'm going to flow air through the scoop's in the hood I'm building!
I love it when a plan comes together! (Puffs cigar) 
Cobra Member
Joined: November 23, 2004
Posts: 1,001
Likes: 0
What are ya gonna do with the Steeda intake???? I might be interested if the price is right! oops you were talking about the motion plates..... Sorry. Let me know when your gonna dyno, I'd like to come watch.
oops you were talking about the motion plates..... Sorry. Let me know when your gonna dyno, I'd like to come watch.
Cobra Member
Joined: May 17, 2004
Posts: 1,476
Likes: 0
Originally posted by 2k5 pony+February 11, 2005, 7:20 PM--><div class='quotetop'>QUOTE(2k5 pony @ February 11, 2005, 7:20 PM)</div><div class='quotemain'><!--QuoteBegin-Vegasjay@February 11, 2005, 7:02 PM
That kit look's awsome! I think making the heatshield seal to the top of the hood is really gona help. That's how I'm going to flow air through the scoop's in the hood I'm building! I love it when a plan comes together! (Puffs cigar)
That kit look's awsome! I think making the heatshield seal to the top of the hood is really gona help. That's how I'm going to flow air through the scoop's in the hood I'm building!
I love it when a plan comes together! (Puffs cigar) [/b][/quote]
I'm die'n to see the stock charge motion plate's compared to Steeda's!! You can find my Hood details in my Post: Pic's: of my "version" of the "gt 500", page 6-7. I'm still not a CPU wiz by any mean's!
Can you post a quote from one thread to another? Can't wait for your ressult's, lookin good!
Thread
Thread Starter
Forum
Replies
Last Post
austin101385
'10-14 Shelby Mustangs
3
Oct 2, 2015 01:00 PM