BMR LCA's - Which ones to get? Ordering Now!
#1
Legacy TMS Member
Thread Starter
Join Date: November 10, 2004
Posts: 2,483
Likes: 0
Received 0 Likes
on
0 Posts
I am going to order the BMR LCA's now but need a little help distinguising the difference between them all. Should i get the Non-Adjsutables or the non-adjsutables with the poly/bearing combo, or the adjsutable with rod end/poly combo.
I do a lot of street and highway driving and i do plan on visiting the track a bit this summer as well.
I do a lot of street and highway driving and i do plan on visiting the track a bit this summer as well.
#3
Non adjustabl poly is fine. That is what I have. You might want to do the UCL at the same time. Bot sure if everyone knows this but Ford racing has a poly bushing and sleeve fot the upper fot $90. I would pay half that but don't like direct rip offs when I know the cost to produce.
I see now that I sold the machne shop business way to soon or should af added a clause that I could come in and use the machines after hours.
I see now that I sold the machne shop business way to soon or should af added a clause that I could come in and use the machines after hours.
#4
I have a set I'm going to be selling if you want them? I used them in Orlando but got a great deal on some Metco arms while I was there too so I'm selling these.
They are the non-adjustable type, cost me $119 plus $9 shipping, I'll take $90 shipped to anywhere inside the US.
Thanks, Doug.
BamaChips@gmail.com is my email and I accept paypal.
They are the non-adjustable type, cost me $119 plus $9 shipping, I'll take $90 shipped to anywhere inside the US.
Thanks, Doug.
BamaChips@gmail.com is my email and I accept paypal.
#5
Join Date: February 20, 2005
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
I have the Race with Spherical rod ends.Definately not for a everyday driver.Very loud and Clank over bumps. Go with poly non adjustable.
<div class='quotetop'>QUOTE(Doug904 @ March 10, 2006, 9:53 PM) Quoted post</div><div class='quotemain'>
I have a set I'm going to be selling if you want them? I used them in Orlando but got a great deal on some Metco arms while I was there too so I'm selling these.
They are the non-adjustable type, cost me $119 plus 49 shipping, I'll take $90 shipped to anywhere inside the US.
Thanks, Doug.
BamaChips@gmail.com is my email and I accept paypal.
[/b][/quote]
Doug did you get my PM I sent you?
<div class='quotetop'>QUOTE(Doug904 @ March 10, 2006, 9:53 PM) Quoted post</div><div class='quotemain'>
I have a set I'm going to be selling if you want them? I used them in Orlando but got a great deal on some Metco arms while I was there too so I'm selling these.
They are the non-adjustable type, cost me $119 plus 49 shipping, I'll take $90 shipped to anywhere inside the US.
Thanks, Doug.
BamaChips@gmail.com is my email and I accept paypal.
[/b][/quote]
Doug did you get my PM I sent you?
#6
<div class='quotetop'>QUOTE(mikem @ March 10, 2006, 9:16 PM) Quoted post</div><div class='quotemain'>
I have the Race with Spherical rod ends.Definately not for a everyday driver.Very loud and Clank over bumps. Go with poly non adjustable.
Doug did you get my PM I sent you?
[/b][/quote]
Sorry! I mean $9 shipping, not 49.
I'm sorry but I respond to my emails first as I havent had a chance to check my PM's. Please email me at BamaCHips@gmail.com for the fastest responce.
THanks, Doug.
I have the Race with Spherical rod ends.Definately not for a everyday driver.Very loud and Clank over bumps. Go with poly non adjustable.
Doug did you get my PM I sent you?
[/b][/quote]
Sorry! I mean $9 shipping, not 49.
I'm sorry but I respond to my emails first as I havent had a chance to check my PM's. Please email me at BamaCHips@gmail.com for the fastest responce.
THanks, Doug.
#7
Team Mustang Source
Join Date: October 11, 2004
Location: Surrey, BC
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
<div class='quotetop'>QUOTE(Mongoose @ March 10, 2006, 6:35 PM) Quoted post</div><div class='quotemain'>
Non adjustabl poly is fine. That is what I have. You might want to do the UCL at the same time. Bot sure if everyone knows this but Ford racing has a poly bushing and sleeve fot the upper fot $90. I would pay half that but don't like direct rip offs when I know the cost to produce.
I see now that I sold the machne shop business way to soon or should af added a clause that I could come in and use the machines after hours.
[/b][/quote]Is that bushing for the front of the UCA or the rear end housing mount?
MSRP on the website is $109.00... [img]style_emoticons/<#EMO_DIR#>/eek.gif[/img]
You can also do the FR500C panhard bushings for a mere $259.00 [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]
Spohn has a poly bushing for the rear end housing mount for just $16.95:
Rear Upper Control Arm Housing Bushing Kit (M5)
Non adjustabl poly is fine. That is what I have. You might want to do the UCL at the same time. Bot sure if everyone knows this but Ford racing has a poly bushing and sleeve fot the upper fot $90. I would pay half that but don't like direct rip offs when I know the cost to produce.
I see now that I sold the machne shop business way to soon or should af added a clause that I could come in and use the machines after hours.
[/b][/quote]Is that bushing for the front of the UCA or the rear end housing mount?
MSRP on the website is $109.00... [img]style_emoticons/<#EMO_DIR#>/eek.gif[/img]
You can also do the FR500C panhard bushings for a mere $259.00 [img]style_emoticons/<#EMO_DIR#>/wacko.gif[/img]
Spohn has a poly bushing for the rear end housing mount for just $16.95:
Rear Upper Control Arm Housing Bushing Kit (M5)
Thread
Thread Starter
Forum
Replies
Last Post