Ponies on The Run (Again)
8/21/08, 09:09 PM
8/21/08, 11:12 PM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
BTW-Reason I was asking about the spacers is because I'm getting rid of my current ones (Sal they're like the ones you have.) and getting these. I didn't/don't have problems with the current one's but I'm tired of having to take them off/on when I go to the track. Plus these are supposedly "safer".
http://mustangwheelspacers.com/index...PROD&ProdID=49
http://mustangwheelspacers.com/index...PROD&ProdID=49
8/22/08, 12:48 AM
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
BTW-Reason I was asking about the spacers is because I'm getting rid of my current ones (Sal they're like the ones you have.) and getting these. I didn't/don't have problems with the current one's but I'm tired of having to take them off/on when I go to the track. Plus these are supposedly "safer".
http://mustangwheelspacers.com/index...PROD&ProdID=49
http://mustangwheelspacers.com/index...PROD&ProdID=49
It's only money
Off to GTR in the morning finally getting those dang gauges put on. I'll try to take picts of the install so I don't get bored waiting.
Jed
Last edited by JedCranium; 8/22/08 at 01:56 AM.
8/22/08, 01:39 AM
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Everytime I see Charlie he has this story to tell. Only thing that changes is the next victims car or carrr!
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
Last edited by JedCranium; 8/22/08 at 01:56 AM.
8/22/08, 07:19 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Everytime I see Charlie he has this story to tell. Only thing that changes is the next victims car or carrr!
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
K-memba!
8/22/08, 10:05 AM
Team Mustang Source
Yo Jed, you'd be cooler if you had a membas only jacket on.....
Anyway, Went to the track last night, didn't run though, and got me a new tensioner. Should install it this weekend. Mod-priority has change a little bit. Drag Radials are still next but immediately afterwards or there abouts is a relocation of my IAT sensor.
It seems some of the stumbling I've had off idle is likely do to the IAT temps going up and the 'puter pulling timing. Relocating the IAT to after the intercooler will help determine a more accurate IAT.
After that I may be going to a bigger Heat Exchanger and or a bigger Intercooler tank. What ever it take to keep the intake temps as cool as possible. Hopefully also prolonging the engine life. Also got my first ballpark for a forged build. Plans, and this is waaaay early folks, is to make around 530-550 to the ground and be ultra-reliable. It should work. The combo that I'll likely go with is in use right now on a 590+ RWHP daily driver.
I'm spending money faster than I can make it.... anyone know where I can donate a kidney or lung.....or have a spare bathtub full of ice ?
Anyway, Went to the track last night, didn't run though, and got me a new tensioner. Should install it this weekend. Mod-priority has change a little bit. Drag Radials are still next but immediately afterwards or there abouts is a relocation of my IAT sensor.
It seems some of the stumbling I've had off idle is likely do to the IAT temps going up and the 'puter pulling timing. Relocating the IAT to after the intercooler will help determine a more accurate IAT.
After that I may be going to a bigger Heat Exchanger and or a bigger Intercooler tank. What ever it take to keep the intake temps as cool as possible. Hopefully also prolonging the engine life. Also got my first ballpark for a forged build. Plans, and this is waaaay early folks, is to make around 530-550 to the ground and be ultra-reliable. It should work. The combo that I'll likely go with is in use right now on a 590+ RWHP daily driver.
I'm spending money faster than I can make it.... anyone know where I can donate a kidney or lung.....or have a spare bathtub full of ice ?
8/22/08, 10:37 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Subwoofer and Speaker Componenet update.....
Finally but them up on ebay. With three days to go the Subwoofer is already up to $70 with 15 "watchers". The Speaker component's still at $1 but has 8 "watchers". I'll post the final results all though it's looking like I'll probably make over the $200 I was asking for both items on just the subwoofer.
Brian-Any pics of the tensioner?
Finally but them up on ebay. With three days to go the Subwoofer is already up to $70 with 15 "watchers". The Speaker component's still at $1 but has 8 "watchers". I'll post the final results all though it's looking like I'll probably make over the $200 I was asking for both items on just the subwoofer.
Brian-Any pics of the tensioner?
Last edited by LEO_06GT; 8/22/08 at 10:39 AM.
8/22/08, 10:58 AM
Team Mustang Source
Subwoofer and Speaker Componenet update.....
Finally but them up on ebay. With three days to go the Subwoofer is already up to $70 with 15 "watchers". The Speaker component's still at $1 but has 8 "watchers". I'll post the final results all though it's looking like I'll probably make over the $200 I was asking for both items on just the subwoofer.
Brian-Any pics of the tensioner?
Finally but them up on ebay. With three days to go the Subwoofer is already up to $70 with 15 "watchers". The Speaker component's still at $1 but has 8 "watchers". I'll post the final results all though it's looking like I'll probably make over the $200 I was asking for both items on just the subwoofer.
Brian-Any pics of the tensioner?
8/22/08, 06:39 PM
Legacy TMS Member
8/22/08, 10:25 PM
Legacy TMS Member
Everytime I see Charlie he has this story to tell. Only thing that changes is the next victims car or carrr!
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
Jed
"Come seee my carrrr...! I raced an Audi aftaar the race the guy pulled up to me and said. H..e..y! Where did you get that carrr? I want one just like it! Ohhhh and btw thank you for kickin my azz, Have a nice day"
Here's a interesting supershaker video, Its cool how its put together!
Click here to see Video
8/22/08, 11:52 PM
Legacy TMS Member
