No power to inertia switch
Thread Starter
Member
Joined: July 25, 2021
Posts: 2
Likes: 3
No power to inertia switch
I have a supercharged 06 Saleen with GT500 pumps car is running just over 800rwhp with nitrous
Last Saturday night whilst racing the car cut out, and I figured fuel problems as have a gauge on fuel rail
Tracing the wiring I find i have now power coming to inertia switch. Have checked and rechecked fuses and relays all good
Done a continuity test on the green and yellow wire from fuse box to inertia switch and have no continuity
Question does this wire go to any other sensor before getting to inertia switch
Last Saturday night whilst racing the car cut out, and I figured fuel problems as have a gauge on fuel rail
Tracing the wiring I find i have now power coming to inertia switch. Have checked and rechecked fuses and relays all good
Done a continuity test on the green and yellow wire from fuse box to inertia switch and have no continuity
Question does this wire go to any other sensor before getting to inertia switch
Administrator clevparts@aol.com
Joined: November 27, 2004
Posts: 12,569
Likes: 4,318
From: Visalia Ca.
@Saleen06
Perhaps The Gt-500 Pump Kit Instructions Will Help! Also Wiring Diagram Showing Inertia Switch.
KC
Perhaps The Gt-500 Pump Kit Instructions Will Help! Also Wiring Diagram Showing Inertia Switch.
KC
Last edited by 05stangkc; Feb 21, 2023 at 09:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post