1994-2004 V-8 GT, GTS, Bullitt, Mach 1, and Cobra

Takin the Cobra to drag strip

Thread Tools
 
Search this Thread
 
Old 8/7/04 | 05:02 PM
  #21  
HotRodLincoln's Avatar
V6 Member
 
Joined: May 21, 2004
Posts: 80
Likes: 0
I forgot to mention...I have a lot of runs from today video recorded (including an 8 second street legal 65 mustang) and as soon as i get to my friends house to transfer all the clips to his computer I will try to get some of them up, although I think I need a host first don't I?
Old 8/7/04 | 05:22 PM
  #22  
Evil_Capri's Avatar
Post *****
 
Joined: February 3, 2004
Posts: 14,155
Likes: 72
Originally posted by HotRodLincoln+August 7, 2004, 4:59 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (HotRodLincoln @ August 7, 2004, 4:59 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Evil_Capri@August 7, 2004, 4:44 PM


Very good!!!

Was humidity high? If it was, just wait till fall!!

You get your 60ft times under 2.0 (~1.9) you might hit 12.6's . . or so it would seem!
No, it was actually quite brisk, the high temperature couldn't have been more than 70 and there was no humidity at all [/b][/quote]
Man, that is great weather!!

What gear is one in as they run through the traps in an '03-'04 Cobra??
Old 8/7/04 | 07:15 PM
  #23  
HotRodLincoln's Avatar
V6 Member
 
Joined: May 21, 2004
Posts: 80
Likes: 0
I believe pearbear usually shifted into 4th right before he crossed the traps, although one run he left it in third and banged the limiter...
Old 8/7/04 | 08:28 PM
  #24  
PearBear's Avatar
Thread Starter
Bullitt Member
 
Joined: May 3, 2004
Posts: 471
Likes: 0
yeah, most of the time i had to hit 4th, but i probably could have left it in 3rd. I dont know why i cant get my 60' times down. Maybe its because of street tires with not a whole lot of rubber. A set of radials/slicks would be helpful.
Old 8/7/04 | 10:00 PM
  #25  
Evil_Capri's Avatar
Post *****
 
Joined: February 3, 2004
Posts: 14,155
Likes: 72
Does your strip mandate a helmet with runs below a certain time? The two around here are 12.9 and 13.9 (where I took the Mach), though the track officials don't get on you too bad if you don't have one. (For under 13.9.)
Old 8/7/04 | 10:19 PM
  #26  
HotRodLincoln's Avatar
V6 Member
 
Joined: May 21, 2004
Posts: 80
Likes: 0
yes, under 13.99 you had to have a helmet, they didn't seem to be too **** about it although they announced that rule right after pearbear's run so he took the hint and borrowed a helmet. the rules also say 13.99 and faster you need a driveshaft loop and i thought that was pretty weird...they didn't make any announcements about it and weren't checking cars for one but i didn't think a driveshaft loop was a very important safety piece, at least not for 13 second cars...
Old 8/8/04 | 10:43 AM
  #27  
conv_stang's Avatar
Shelby GT500 Member
 
Joined: March 3, 2004
Posts: 2,633
Likes: 0
From: Richmond VA
yeah, good runs. a driveshaft loop probably isnt that important for a 13 second car. but below that i would get one. it keeps the driveshaft from breaking through the floor if it fails.
Old 8/8/04 | 02:18 PM
  #28  
Scothew's Avatar
Stubborn Bear
TMS Staff
 
Joined: January 30, 2004
Posts: 22,689
Likes: 48
From: Sticks, AL
12.8 on your first time to the track!!! congrats!
Old 8/9/04 | 06:44 AM
  #29  
PearBear's Avatar
Thread Starter
Bullitt Member
 
Joined: May 3, 2004
Posts: 471
Likes: 0
Thanks! the only hard part is not spending money on my car to make it to the 11 range. well, i suppose I can wait till next summer........
Old 8/9/04 | 08:25 AM
  #30  
mr-mstng's Avatar
GTR Member
 
Joined: January 30, 2004
Posts: 4,743
Likes: 3
From: NE PA
Great job Travis! That's awesome!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kponypower
GT
13
6/17/20 07:17 AM
Autotooner
SN95 Mustang
11
11/24/17 12:42 PM
trackpack13gt
SN95 Mustang
6
10/2/15 08:20 PM
tj@steeda
Auto Shows and Events
0
9/30/15 07:02 PM
GLOCKer
General Mustang Chat
2
9/28/15 05:20 PM



Quick Reply: Takin the Cobra to drag strip



All times are GMT -6. The time now is 04:08 PM.