http://www.latemodelrestoration.com/...0%201&comp=LRS

thanks

 

If you have a 4-cylinder, probably not. But if you have an 8 you may want to consider. I had KYB and FMS lowering springs on an old Capri 5.0 and did not have CC plates. I was planning on putting them on, but sold her before I purchased a set.

 

So i should be good then, thanks for the reply

 

If you can afford CC plates I would suggest going with them as they will allow more adjustment with your front end alignment

 

which ones should i go with? preety much any one for my car?

 

I went with BBK's for the 'vert. That's not to say they're the best but they were inexpensive and they work fine. Do some research and find which ones serve your needs best. If you're not going to be doing any road racing and just want a pair to give you more adjustment then the BBK's would be fine.
http://www.brothersperformance.com/c...products_id/90

 

I have Maximum Motorsports CC plates, but that just my opinion. They seem to give the most adjustment compared to the other brands I have used in the past...