View Poll Results: Do you prefer us lobbing Potatoes or Grenades to take care of spammers?
Lob potatoes to just stun them
2
16.67%
Lob grenades and remove them from the TMS pool permanently
10
83.33%
Voters: 12. You may not vote on this poll
Mustangs Coast to Coast
A Man Just Needs Some....
Does anybody else think that the newer mustangs just don't sound right? Not that they sound bad but just not like a proper mustang. There is no other car that you can pick out a couple blocks away like a fox body 5.0. Sn95 and new edges sound really similar. 2005+ just not the same.
legacy Tms Member
earlier this year while i was jogging i thought i heard a diesel truck coming up behind me .. it went thru a bunch of gears and i got ready for a blast of wind as it approached me but to my surprise it was a dodge viper .. those things sound awful .. just like the new camaros .. hate them too ..
The Legacy TMS Lady
Originally Posted by HOSS429
earlier this year while i was jogging i thought
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
Does anybody else think that the newer mustangs just don't sound right? Not that they sound bad but just not like a proper mustang. There is no other car that you can pick out a couple blocks away like a fox body 5.0. Sn95 and new edges sound really similar. 2005+ just not the same.
BoogieNights Studios:
Official Fluffer
Official Fluffer
Join Date: September 13, 2009
Location: Clarksville, TN
Posts: 5,520
Likes: 0
Received 5 Likes
on
5 Posts
Post *****
Thread Starter
The old 5.0 is so distinct and sounds so incredible.
The wife took the Notch the other day while I was outside working on Christmas lights and the wonderful sound of the 5.0 driving away was music to my ears. But I could hear the car coming down the street and knew exactly what it was without even looking.
With the exception of a big block, I don't know how it could sound any better. It does have Flowmasters on it though, but still has the cats.
The wife took the Notch the other day while I was outside working on Christmas lights and the wonderful sound of the 5.0 driving away was music to my ears. But I could hear the car coming down the street and knew exactly what it was without even looking.
With the exception of a big block, I don't know how it could sound any better. It does have Flowmasters on it though, but still has the cats.
Originally Posted by lalayla
Nice watch Al and cobra.
I am upgrading my phone for Xmas. This one is kinda sorta cracked.
I am upgrading my phone for Xmas. This one is kinda sorta cracked.
Calgon Take Me Away!
Originally Posted by phiggs54
You must have an iPhone4. I cracked my display the first week I had it.
A Man Just Needs Some....
Originally Posted by 2k7gtcs
The old 5.0 is so distinct and sounds so incredible.
The wife took the Notch the other day while I was outside working on Christmas lights and the wonderful sound of the 5.0 driving away was music to my ears. But I could hear the car coming down the street and knew exactly what it was without even looking.
With the exception of a big block, I don't know how it could sound any better. It does have Flowmasters on it though, but still has the cats.
The wife took the Notch the other day while I was outside working on Christmas lights and the wonderful sound of the 5.0 driving away was music to my ears. But I could hear the car coming down the street and knew exactly what it was without even looking.
With the exception of a big block, I don't know how it could sound any better. It does have Flowmasters on it though, but still has the cats.
The Legacy TMS Lady
I get to pick my kid up at the airport Friday morning.....he's been gone for almost 8 weeks already.
A Man Just Needs Some....
Originally Posted by 08GTCandyApple
I get to pick my kid up at the airport Friday morning.....he's been gone for almost 8 weeks already.
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes
on
4 Posts
I knew a guy who was an insulation contractor and he used marine plywood for the bathroom underfloor in the event of any future leaks or condensation. What do you think about that? Overkill?
Also, when electricians use knockouts in BCI I joists, is it ok to run several wires (3-4) through that 1" knockout? And is it ok to run a 220 dryer wire in the same one as 110 wires? (Don't know if there's heat buildup where they contact.)
Last edited by cdynaco; 12/14/11 at 12:58 PM.
Post *****
Thread Starter
Charlie,
Running several 110s through the same hole is not a problem. Here is a pic of the wires running to one of my sub panels. The black is the 220 feed and the yellow is the romex.
The same goes for the 220 and 110 together. BCI isn't bad to use a different hole but in studs it's best to minimize the holes to retain the strength in the stud or plate I think.
As far as the marine plywood it's a thought. Personally if it were a bad leak like from a toilet or sewer line where you run the risk of fecal matter in a leak I would want to rip it all out anyway.
We don't have a lot of plywood subfloors because we build on concrete slab on grade foundations and 95% of those are single story.
Running several 110s through the same hole is not a problem. Here is a pic of the wires running to one of my sub panels. The black is the 220 feed and the yellow is the romex.
The same goes for the 220 and 110 together. BCI isn't bad to use a different hole but in studs it's best to minimize the holes to retain the strength in the stud or plate I think.
As far as the marine plywood it's a thought. Personally if it were a bad leak like from a toilet or sewer line where you run the risk of fecal matter in a leak I would want to rip it all out anyway.
We don't have a lot of plywood subfloors because we build on concrete slab on grade foundations and 95% of those are single story.
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes
on
4 Posts
Thanks!
I'm trying to do as much under floor prep as I can - marking knockouts and some plumbing and wiring and insul - before I put the lid on. It will be easier that way rather than having to start at square 1 from underneath.
I'm trying to do as much under floor prep as I can - marking knockouts and some plumbing and wiring and insul - before I put the lid on. It will be easier that way rather than having to start at square 1 from underneath.