Lowering Parts List
#21
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Well I talked with Jay and ordered the Koni STR.T shocks and struts and the gt500 mounts. I have the ford racing k springs and panhard bar in my garage. I plan on going to Mustang Magic in Long Island NY. They said the install with cost $275 for the parts which i didnt think was bad at all. The shop where i got my resonators removed wanted $400 and its not even a "known" mustang shop.
#24
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Sitting in the shop now waiting to get everything installed. Can't wait to get rid of that gap. Hopefully everything goes smoothly! Pics to follow
#26
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
#27
Maybe wrong torque specs on the upper mounts. I have a squeak over large speed bumps but no clunk or anything. I think it might be my pan hard bar or front lca's. take it to whoever is talked it and let them diagnose.
#28
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
It could be something hitting the lcas since I didn't put in relo brackets the angle is probably off and the panhard is hitting them over large bumps
#29
The panhard bar is a good six inches behind your lca's. the only way your panhard bar would touch your lca's is if you got rear ended by a bus.
#30
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
#31
Is the noise coming from the front or rear of the car? Rear, take a look at all your components. Front, make sure they retorqued the struts back in and they used Loctite. Also make sure they completely tightened down the strut mount bolt that holds the strut assembly together.
#32
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Is the noise coming from the front or rear of the car? Rear, take a look at all your components. Front, make sure they retorqued the struts back in and they used Loctite. Also make sure they completely tightened down the strut mount bolt that holds the strut assembly together.
#34
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
That may be it. It definitely sounds like some hollow metal is being hit. Do you think the over axle pipes just need to be tightened down more or will it just be something i have to live with? Good thing is on normal everyday driving with the normal there is no increase is nvh or any unusual sounds. Just hear the clanking when going over very large bumps. Also i may add its when both rear tires go over the same bump. Meaning if the pothole is on the right side and only the right tire hits it there is no noise.
Last edited by joey8; 7/8/13 at 11:41 AM.
#35
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: June 20, 2008
Location: Highlands Ranch, CO
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
You might be able to adjust them to get rid of it if that is what's causing the noise. I ended up going with an aftermarket panhard bar brace ( I believe it was CHE) on my 09 GT to get rid of the noise. Mine was much worse though and went from just clanking over bumps to constant rattling.
Last edited by MadMoose; 7/8/13 at 12:39 PM.
#36
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
You might be able to adjust them to get rid of it if that is what's causing the noise. I ended up going with an aftermarket panhard bar brace ( I believe it was bmr) on my 09 GT to get rid of the noise. Mine was much worse though and went from just clanking over bumps to constant rattling.
#37
My guess is the upper mounts or front lca's. I dunno. I'm getting a squeak over large bumps and dips in the road. I dunno, I think it's my front lca's. I'm going to have the dealer check it out.
#38
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: January 25, 2013
Location: Jersey
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
It's coming fromthe rear though. Im leaning towards the over axle pipes hitting something.
#40
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: June 20, 2008
Location: Highlands Ranch, CO
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
If that is the case a CHE brace would almost certainly fix the noise, it gives like another full inch or two of clearance. I'd go look under the car and see how close they are to touching.