Post your Mustang StripeS , pictures & discussion in here
3/27/13, 12:15 PM
#221
Cobra R Member
I couldn't find a gloss metallic green or I would have went with that.
3/30/13, 09:09 PM
#223
Member
Join Date: April 3, 2012
Location: San Diego, Ca.
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Studly:
Your car is inspiring me to try to copy what you've done with the side graphics. That is one awesome, yet very classy look, no doubt about it!
So, some questions: did you get them custom made, or buy them somewhere on the net? If you did, please post the link. Were they dry applied, or with water so you could slide them around abit before they set?
I'm thinking that this design, although very "Roush-ish" looking, allows one to choose a number of color combos that could be totally unique.
Any help and direction you can provide would be much appreciated.
Again, that is one classy looking Mustang.
Your car is inspiring me to try to copy what you've done with the side graphics. That is one awesome, yet very classy look, no doubt about it!
So, some questions: did you get them custom made, or buy them somewhere on the net? If you did, please post the link. Were they dry applied, or with water so you could slide them around abit before they set?
I'm thinking that this design, although very "Roush-ish" looking, allows one to choose a number of color combos that could be totally unique.
Any help and direction you can provide would be much appreciated.
Again, that is one classy looking Mustang.
3/31/13, 12:52 PM
#224
Mach 1 Member
Join Date: August 21, 2011
Location: Morgantown, West Virginia
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
Studly:
Your car is inspiring me to try to copy what you've done with the side graphics. That is one awesome, yet very classy look, no doubt about it!
So, some questions: did you get them custom made, or buy them somewhere on the net? If you did, please post the link. Were they dry applied, or with water so you could slide them around abit before they set?
I'm thinking that this design, although very "Roush-ish" looking, allows one to choose a number of color combos that could be totally unique.
Any help and direction you can provide would be much appreciated.
Again, that is one classy looking Mustang.
Your car is inspiring me to try to copy what you've done with the side graphics. That is one awesome, yet very classy look, no doubt about it!
So, some questions: did you get them custom made, or buy them somewhere on the net? If you did, please post the link. Were they dry applied, or with water so you could slide them around abit before they set?
I'm thinking that this design, although very "Roush-ish" looking, allows one to choose a number of color combos that could be totally unique.
Any help and direction you can provide would be much appreciated.
Again, that is one classy looking Mustang.
I got the vinyl from this website.
http://www.metrorestyling.com/3M-108...te1080m227.htm
5'x1' was exactly enough to do the sides and hood. The shop used knifeless tape to lay out the design, and the vinyl was put over the tape. After the vinyl was laid down, the tape was pulled which cut the vinyl to the exact shape. It took about an hour, so if you're good with vinyl I'd say go for it.
http://knifelesstechsystems.com/Products.aspx
4/6/13, 06:39 AM
#227
Shelby GT500 Member
I was hoping to find some GHIG metallic stripes so I could put them on the DIB. I couldn't find any and got a rather large quote to get them painted on. I was thinking it would have the same type of visual impact as the Superman striped GT500's.
4/6/13, 07:43 AM
#228
Cobra R Member
Lol that would have been cool. 1/1 for sure
4/6/13, 03:17 PM
#229
Shelby GT500 Member
I still might end up doing it to change it up and be different when I get back to the states. It really depends on how well they hold up over the next few years. I would have to have a shop custom cut them with the correct color though so it might be a little spendy. At least I know I can install them myself without issues.
4/6/13, 06:49 PM
#230
Cobra R Member
I still might end up doing it to change it up and be different when I get back to the states. It really depends on how well they hold up over the next few years. I would have to have a shop custom cut them with the correct color though so it might be a little spendy. At least I know I can install them myself without issues.
4/7/13, 03:31 PM
#232
Shelby GT500 Member
4/7/13, 04:16 PM
#233
Mach 1 Member
Thread Starter
Join Date: January 18, 2013
Location: Geneva & Puerto Rico
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
4/7/13, 04:17 PM
#234
Mach 1 Member
Thread Starter
Join Date: January 18, 2013
Location: Geneva & Puerto Rico
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
4/9/13, 08:09 PM
#237
Mach 1 Member
Thread Starter
Join Date: January 18, 2013
Location: Geneva & Puerto Rico
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
