Very nice work...how hard was it to do the lower grille setup. I need you to do mine!!!!

 

So I was looking and DR3Z-8200-BD might just be the stock GT grille. I can't find any images of it, and I suppose I could go check my stock GT grille in the garage if that is the correct PN, but either way.... it's not anything special here.

 

I removed the grille, then cut within 1/4" of the edge all the way around with a 4.5" cutoff wheel on a grinder. then used a diegrinder and got it close to the edge, then spent a couple hours with a file to smooth it out, but then the back edge had a stepped pattern that alternated with the honeycomb, and it was not deep enough. It didnt look good. So I took a piece of of kydex like material that I was able to heat form and molded a new insert to fit into the lower grille surround to extend it 3" Now I am OK with it.

 

wow it really looks good!!! you got some mad skills.

 

This is all I have found on DR3Z-8200-BD. Its is listed in various places, but only this site had a description. Only reason I'm interested is because I would prefer silver grille or dark stainless or black. Of course I'm not sure how dard a "Dark Stainless" is , but assumed dark gray, maybe like Brembo Wheels.

http://www.partscheap.com/2013-Ford-...3z-8200-bd.htm

2013 Ford Mustang OEM Ford Billet Grille
Aggressive Styling: Improve the front-end look of your Mustang V6 or GT with this stylish billet grille. This Ford billet grille was designed by Ford to give your 2013 Mustang a special aggressive look. This grille is made of hardened plastic construction and is silver in color.

Install: This part is a direct replacement for all V6 and GT vehicles.
When installed on GT vehicles, you will lose your grille mounted fog lights. Please purchase the Starkey Fog Light Kit to add fog lights to your lower grille.

Fits: Ford Mustang V6, GT - 2013
Does not fit Pony Package.

 

Just received my FORD lower fog light kit, to my door for $127 from Tousley Ford. Its complete, only diffrence with Starkey is that the wire harness comes unterminated on one end. Not an issue for me and well worth the cost savings.

 

Thanks to this thread I saved like $200 on the CS lower grille I just bought. Thanks Diva!

 

as payment I will accept $100 or a supercharger. whichever is more expensive :-P

 

That splitter is looking nice. i was going to do the CS one but now Im not sure. Decisions decisions...

 

Man, that looks great.

 

 

Daaamn! Looks like a beast. What lower grille (with the brake ducts) is that?

 

He built it from the stock grille. Pretty badass.

 

Looks like machine gun mounts! "So, Mr. Bond, we meet again...." I like it, Roller. Danielle is right on the money.

 

Thanks! It wasn't as good as I wanted but I do like it.

 

That does look cool

 

I guess I should have posted here instead of starting a new thread, MY BAD, but does anyone know if any of these grilles (other than the AM one) allows us to keep the foglights behind the grille?? The AM grille has been on backorder for over 3 months now. I got a foglight relocation kit that I want to use and am tired of waiting for the slow boat from CHINA (probably).

TIA

 

Nope, only the AM grilles. What do you mean by foglight relocation kit?

 

I got this kit and it's pretty slick.
http://www.ebay.com/itm/2013-Ford-Mustang-GT-V6-fog-lights-relocation-kit-/151014699498?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A2013%7CModel%3AMustang&hash=item23292d71ea&vxp=mtrYou basically take the stock fogs out, switch them each to the opposite side and use the hardware he provides to re-attach them to the car using 2 of the 3 existing mounting holes on the car, then you attach the two lights together with another brackect on the remaining attachment holes on the foglights themselves.

 

I'm sure I can 3D print one for cheaper and custom bulb gap. I wonder if there is any demand for such an item. I'm just not to fond of the "buck tooth" look the Eleanor spacing gives off. Plus I prefer a wider light throw anyway