Rough Stage1 SC
#21
I Have No Life
Congrats! And welcome to the dark side. It's nice over here, as you will see
Just take your time on the install. I can't speak for the Roush install and instructions, but I'd think they are all similar to others. Just bring a couple of buddies, beer, and pizza, and knock it out over the weekend. That's what we did.
Just take your time on the install. I can't speak for the Roush install and instructions, but I'd think they are all similar to others. Just bring a couple of buddies, beer, and pizza, and knock it out over the weekend. That's what we did.
#22
Mach 1 Member
Thread Starter
Well it arrived today. I was reading through the instructions and they do not do a good job explaining the steps for the automatic transmission cooling lines.
#23
Mach 1 Member
You can do the lines 2 ways, either removing the bracket closes to the radiator and relocating them or use the hose that came with the kit to relocate the one line. It will take sometime, but move the lines and install the bracket and that will tell you how much more you need to move them towards the passenger side.
Last edited by Blown CS; 2/17/15 at 07:09 AM.
#25
Mach 1 Member
Thread Starter
Is there a good video online or an article that does a good job? I have looked and haven't found anything great. I figured there would have been a few to do a good job documenting the install.
#26
Mach 1 Member
A few mustang magazines had feature article doing the install. Mustang and fast fords was one and if search Google vmp or roush install you should get several hits.
#28
Mach 1 Member
Thread Starter
Does anyone have any pics of how the heat exchanger is mounted?
The instructions kind of suck though this part. I have been searching high and low on the internet but the 2015 install video's are already dominating the net. LOL
Does the heat exchange get mounted in between the radiator and the AC condenser?
The instructions kind of suck though this part. I have been searching high and low on the internet but the 2015 install video's are already dominating the net. LOL
Does the heat exchange get mounted in between the radiator and the AC condenser?
Last edited by 2014GHIGGT; 2/18/15 at 08:36 PM.
#29
Mach 1 Member
Does anyone have any pics of how the heat exchanger is mounted?
The instructions kind of suck though this part. I have been searching high and low on the internet but the 2015 install video's are already dominating the net. LOL
Does the heat exchange get mounted in between the radiator and the AC condenser?
The instructions kind of suck though this part. I have been searching high and low on the internet but the 2015 install video's are already dominating the net. LOL
Does the heat exchange get mounted in between the radiator and the AC condenser?
#30
Mach 1 Member
Thread Starter
I found this great automatic supplement online and it makes everythign clear.
http://www.jegs.com/InstallationInst...832-421277.pdf
http://www.jegs.com/InstallationInst...832-421277.pdf
#31
Mach 1 Member
Thread Starter
So. My install is almost complete. I say almost because my kit was short the pump bracket. Of course I called Roush and they are closed until Monday. That said My install is complete with the exception of mounting the pump. I did install the heat exchanger, and all of the hoses, etc. What a bummer.
Last edited by 2014GHIGGT; 2/21/15 at 04:28 PM.
#32
I just bought a used roush tvs kit myself. It will be arriving next week. Excited and nervous about installing it. The guy sold it with a 79 mm, 82 mm, and 85 mm pulley and the jlt intake. I'm thinking 82mm should be a good starting point
Any tricks I should know during installation?
P.S.
I was going with a centri but got a good deal on this and it was a no brainer.. Instant torque !!!!
Any tricks I should know during installation?
P.S.
I was going with a centri but got a good deal on this and it was a no brainer.. Instant torque !!!!
#33
forgot to ask.. MY car is a convertible. I've searched and haven't seen too many options for the strut tower brace. Will the 2011+ GT500 brace fit with t he roush and jlt intake?
Last edited by woodzusa; 2/21/15 at 06:51 PM.
#34
Mach 1 Member
Thread Starter
I just bought a used roush tvs kit myself. It will be arriving next week. Excited and nervous about installing it. The guy sold it with a 79 mm, 82 mm, and 85 mm pulley and the jlt intake. I'm thinking 82mm should be a good starting point
Any tricks I should know during installation?
P.S.
I was going with a centri but got a good deal on this and it was a no brainer.. Instant torque !!!!
Any tricks I should know during installation?
P.S.
I was going with a centri but got a good deal on this and it was a no brainer.. Instant torque !!!!
#35
Mach 1 Member
Thread Starter
#36
#37
Mach 1 Member
Thread Starter
#38
Last edited by GT50GO; 2/21/15 at 08:19 PM.
#39