Fays2 Watts Link, Koni Sports, Strano Sways, BBR LCA's installed
#41
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 19, 2010
Location: Currently in Baghdad
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
I think he was including the sways and LCAs in his 2.5, which is probably pretty close. Either way you will see a huge improvement in handling with springs/shocks/strut top/watts link. I think mine came out to around 1500 total with the Steeda HD strut mounts included.
#42
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: July 15, 2010
Location: Greenville NC
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
In my experience you won't need sways with the Watts Link. You can adjust the roll center. Mine corners very flat and very neutral with the roll center down one notch.. On the lower control arms, I just yanked my J&M's off and put them on Ebay. Too big a NVH penalty. Car is silent once again.
#44
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: July 15, 2010
Location: Greenville NC
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
#45
In my experience you won't need sways with the Watts Link. You can adjust the roll center. Mine corners very flat and very neutral with the roll center down one notch.. On the lower control arms, I just yanked my J&M's off and put them on Ebay. Too big a NVH penalty. Car is silent once again.
http://www.hotpart.com/shop/index.ph...ct_detail&p=46
Or was it the cheaper ones?
thanks
dh
#46
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: July 15, 2010
Location: Greenville NC
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
No These: http://www.hotpart.com/shop/index.ph...ct_detail&p=45
You would have thought the Polyball ones would be quiet, but no.
You would have thought the Polyball ones would be quiet, but no.
#47
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread
Thread Starter
Forum
Replies
Last Post
SMBJoshy
2010-2014 Mustang
2
8/16/15 02:48 PM