CNL Cold Air Intake - 2011 Mustang GT 5.0L 4V
#21
Cobra R Member
Join Date: March 12, 2004
Location: Orange County, CA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
#24
Cobra Member
Join Date: January 12, 2006
Location: Houston, Texas
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Oh I know, especially since MMR already was proven to be advertising BS power numbers. Not saying Evolution is but I'll make sure to keep an eye open.
Last edited by mustangfan123; 6/6/10 at 02:37 PM.
#25
Former Vendor
Thread Starter
Join Date: May 29, 2005
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
There is alot going on with the auto trans, we have a lot of time invested in the Engine and Transmission calibration. This isn't something we just started working on........
When we release our calibrations for both the Manual and Automatic 2011 Mustang GT and Mustang V6 you can be sure they will be the most powerful and reliable tunes available.
The best Ford Tuner in the world, Jon Lund is doing all the calibrations so you can be sure they will be the very best!
Last edited by Evolution Performance; 6/6/10 at 03:17 PM.
#26
Bullitt Member
Join Date: May 15, 2010
Location: Arkansas
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
LMAO then everyone will just say the "fixed" the numbers by doing something else! Then while everyone is blabbing about that Joe blow over there will have one and be
#27
Believe it or not some people will buy the product without actually seeing the results because they trust Evo or like the look of the intake. So I don't really see a problem taking pre-orders before the dyno graph goes up. I'm willing to give them the benefit of the doubt or at least not assume they are lying before results are posted.
Sorry if it seems like I'm picking on you, that was not my intention. You were just the most vocal, no hard feelings.
#28
Basically it was an incomplete test and no everyone is bashing MMR.
With that being said I would put money on the C&L being a better overall CAI and that is mainly due to overall design.
#29
You do realize that WMS found that the computer was partially closing the throttle during the dyno pulls with the MMR CAI, he also did not reset the computer prior to testing like MMR recommended.
Basically it was an incomplete test and no everyone is bashing MMR.
With that being said I would put money on the C&L being a better overall CAI and that is mainly due to overall design.
Basically it was an incomplete test and no everyone is bashing MMR.
With that being said I would put money on the C&L being a better overall CAI and that is mainly due to overall design.
He did what most of us would do. Bought it, installed it and ran it. Props to MMR for working with him on this.
#30
Yeffery, you should correct your comment. If you read in the other thread, MMR is working with him to get any problems corrected. You are inaccurately claiming that he "did not reset the computer prior to testing like MMR recommended". That was not the case. The instructions provided with the CAI did not tell him to reset the computer as you state.
He did what most of us would do. Bought it, installed it and ran it. Props to MMR for working with him on this.
He did what most of us would do. Bought it, installed it and ran it. Props to MMR for working with him on this.
#31
Yeffery, you should correct your comment. If you read in the other thread, MMR is working with him to get any problems corrected. You are inaccurately claiming that he "did not reset the computer prior to testing like MMR recommended". That was not the case. The instructions provided with the CAI did not tell him to reset the computer as you state.
He did what most of us would do. Bought it, installed it and ran it. Props to MMR for working with him on this.
He did what most of us would do. Bought it, installed it and ran it. Props to MMR for working with him on this.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
Last edited by JJ@WMS; 6/10/10 at 07:14 AM.
#32
GT Member
Join Date: April 29, 2010
Location: Knoxville, TN
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Qrazy, you are correct. This person (yefferys50) would appear to have an axe to grind with them, or perhaps is buddy's with a competitor. Either way, the discussion that ensued in that other thread was great, and yefferys50's comments were correctly and sufficiently debunked. It should be noted that virtually all of the posts he has made in here since joining (yesterday) have been something negative, the majority against JJ@WMS.
#33
Bullitt Member
Join Date: January 24, 2010
Location: fredneck county, MD
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
^
+1
it's fairly obvious this poster yefferys50 is trying to shed negative attention on JJ@WMS
whatever the motive, i think most of us can see through his/her charade
JJ, just keep doing what you're doing because when the trees part and we get to the end the truth talks and the walks
+1
it's fairly obvious this poster yefferys50 is trying to shed negative attention on JJ@WMS
whatever the motive, i think most of us can see through his/her charade
JJ, just keep doing what you're doing because when the trees part and we get to the end the truth talks and the walks
#34
Thats exactly how it transpired and exactly how I did the testing. If I were to have been told beforehand or even read in the advertisement or online that you needed to reset the computer I would have done so but this CAI was advertised as basically a plug and play CAI with no tuning needed. Thanks.
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
#35
Cobra Member
Join Date: November 30, 2009
Location: South
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Thats exactly how it transpired and exactly how I did the testing. If I were to have been told beforehand or even read in the advertisement or online that you needed to reset the computer I would have done so but this CAI was advertised as basically a plug and play CAI with no tuning needed. Thanks.
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
#36
#37
Cobra Member
Join Date: January 12, 2006
Location: Houston, Texas
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
You do realize that WMS found that the computer was partially closing the throttle during the dyno pulls with the MMR CAI, he also did not reset the computer prior to testing like MMR recommended.
Basically it was an incomplete test and no everyone is bashing MMR.
With that being said I would put money on the C&L being a better overall CAI and that is mainly due to overall design.
Basically it was an incomplete test and no everyone is bashing MMR.
With that being said I would put money on the C&L being a better overall CAI and that is mainly due to overall design.
Yes I do, but I had not prior to JJ's testing. MMR didn't post this stuff until after he tested their CAI....
#39
Qrazy, you are correct. This person (yefferys50) would appear to have an axe to grind with them, or perhaps is buddy's with a competitor. Either way, the discussion that ensued in that other thread was great, and yefferys50's comments were correctly and sufficiently debunked. It should be noted that virtually all of the posts he has made in here since joining (yesterday) have been something negative, the majority against JJ@WMS.
You guys are way too sensitive.
^
+1
it's fairly obvious this poster yefferys50 is trying to shed negative attention on JJ@WMS
whatever the motive, i think most of us can see through his/her charade
JJ, just keep doing what you're doing because when the trees part and we get to the end the truth talks and the walks
+1
it's fairly obvious this poster yefferys50 is trying to shed negative attention on JJ@WMS
whatever the motive, i think most of us can see through his/her charade
JJ, just keep doing what you're doing because when the trees part and we get to the end the truth talks and the walks
Again, you guys are way too sensitive.
Thats exactly how it transpired and exactly how I did the testing. If I were to have been told beforehand or even read in the advertisement or online that you needed to reset the computer I would have done so but this CAI was advertised as basically a plug and play CAI with no tuning needed. Thanks.
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
Not sure what you have seen here or on other forums but wanted to let you know, just in case your confusing me with another company, that we are Woodbine Motorsports not the other WMS, Western Motorsports.
Also here is a quick scenario, tell me what you would do.....
You buy a 150k Lambo and your just a regular guy who likes fast cars. You read an ad that shows you a cool looking CAI for your new lambo that requires nothing more from you then just installation, you purchase it and take the car to the dyno for a before and after test. Now since your a regular guy and arent going to, have the ability to, nor have you been told to datalog the car, reset the PCM or anything else you strap her down, do a baseline pull then install the CAI that promised you no tuning needed, no adjustments needed and did not come with anything other then installation instruction. Now its installed and the car is dyno'd again and it loses power.... what would your first post about the results be?
I look at it like this. I spent over $400 bucks to get this new product to test it "as advertised" just like any regular guy would do. I found a problem not only with the CAI itself (extra fitting not needed) but with how the computer reacts to having one installed. Now the manufacturer has stepped up to the plate and is changing their directions to reflect what needs to be done. I have yet to see anyone, and I repeat anyone else post up about them installing this CAI so that leads me to believe I was the first and now just saved alot of people, including MMR themselves alot of headaches from what I found while spending my own money. MMR did not give me one nor did I get a discount. I actually waited 3 weeks for it to show up and paid almost $30 for ground shipping from CA.
It will be dyno'd again this week and I will post up the results. I also like the way the car sounds and pulls now that its installed with the throttle issue fixed. I am also tuning the car with the CAI and will post back with a CAI/Tune combo dyno result.
Also wanted to add an apology to EVO, sorry for the OT in your thread.
Thanks,
JJ
Obviously you have no idea what a troll is. Stop being so overly sensitive, I questioned an inconclusive test. I did not disparage anyone for the last time.