Trunk tie-down
#23
#25
V6 Member
Thread Starter
Join Date: June 7, 2012
Location: SoCal
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Snoopy49, I gave up waiting for my DIBwWS & found a HPWwSD, just the opposite of you. I am VERY happy with white! This car gets enough attention from those who recognize the badges! A stripe could get too much IMO.
Back to the cargo net. The instructions show plastic inserts holding the top of the trunk liner at the top rear of trunk. Your '13GT500 will have bolts instead on both sides. You must remove both bolts and their slip-on nuts & replace with the slip-on nuts & threaded net hooks supplied because they are a different size from the removed nut & bolt. All done, just stretch net between the hooks!
Now, if one has a sub on right quarter of trunk, there is the challenge. Being a retired engineer, I found an elegant solution that I will explain if anyone needss it.
Back to the cargo net. The instructions show plastic inserts holding the top of the trunk liner at the top rear of trunk. Your '13GT500 will have bolts instead on both sides. You must remove both bolts and their slip-on nuts & replace with the slip-on nuts & threaded net hooks supplied because they are a different size from the removed nut & bolt. All done, just stretch net between the hooks!
Now, if one has a sub on right quarter of trunk, there is the challenge. Being a retired engineer, I found an elegant solution that I will explain if anyone needss it.
#26
Bullitt Member
Join Date: June 20, 2012
Location: Central Coast California
Posts: 401
Likes: 0
Received 1 Like
on
1 Post
I agree on the white with stripe delete. No matter which color stripe I looked at, they all overpowered the white. It would have been nice if they had offered a light gray or silver stripe as an option. I wasn't going to go with a stripe on the DIB until I saw a car with the DIB and the matte black stripes. I was sold.The stripes enhance the appearance of the DIB without shouting "I'm a Shelby".
Thread
Thread Starter
Forum
Replies
Last Post