I am need of the discharge manifold for a 6P A/C compressor. See the picture below. The discharge manifold is the one with the hi-pressure pop valve.

I also need the two brakes lines that go from the master cylinder to the distribution block.

The parts above should be for an aero Fox 5.0 Mustang.
Thanks!

Attachment 31099

 

I don't have them, but how hard would it be to fab up the lines???

 

Not too difficult.

But more expensive getting the bending and flaring tools and stock then just getting some lines from a used car.

 

You can buy the brake lines with the fittings on them cheaply so you don't need the flaring tools and a bending jig is really cheap.
Why get old cheap parts when you can get new cheap parts.

 

Good call, karman.

I do have one line that has two different size fittings. I am using the 73mm calipers and SVO MC on my 84.

Decided to go another route, though.
Thanks.