So I got my OEM build specs from Ford...
#1
Member
Thread Starter
Join Date: July 21, 2010
Location: Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
So I got my OEM build specs from Ford...
And the sheet says I should have heated seats but there are no buttons that I can find. From what little I can glean from the owners manual, the seat heater buttons should be at the bottom of the console, between the A/C and Recirc buttons. Is that right?
Everything else on the sheet is correct.
Everything else on the sheet is correct.
#4
Member
Thread Starter
Join Date: July 21, 2010
Location: Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ron but I have the original window sticker. The original owner was nice enough to tuck it into the owners manual packet. Nothing there about seat heaters either.
I guess the Ford records are inaccurate in that one point.
BTW, in your signature you have that your car is #1,624 of 5,915 Coupes and #295 of 1,306 White Coupes. Is that something I can figure out from my VIN or do I have to get the GT/CS certificate from Ford to get those numbers?
I guess the Ford records are inaccurate in that one point.
BTW, in your signature you have that your car is #1,624 of 5,915 Coupes and #295 of 1,306 White Coupes. Is that something I can figure out from my VIN or do I have to get the GT/CS certificate from Ford to get those numbers?
Last edited by CoryB; 7/26/10 at 11:47 AM.
#8
You would have to contact FPG and order a certificate from them. But if you email me the VIN number I can add the car to the registry and you could get the 15% discount. It would make a great selling point for the new owner to have it validated by the factory. Here is my email address:
GTCSforums@comcast.net
Ron Davis (Site Owner)
GTCSforums@comcast.net
Ron Davis (Site Owner)
Thread
Thread Starter
Forum
Replies
Last Post