Recommended Tire pressure
#21
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: September 8, 2009
Location: Santa Barbara, California
Posts: 282
Likes: 0
Received 3 Likes
on
3 Posts
Here are the size casting marks on two of the GT/CS polished aluminum wheels. One of the other marks includes the letters "CHROM", but all the wheels have "POL" in some place on one of the spokes.
Those GT500 takeoff wheels and tires are really nice. they move the wheel face at least half an inch toward the outside of the fender. Looking nice and fat from the back, too.
Those GT500 takeoff wheels and tires are really nice. they move the wheel face at least half an inch toward the outside of the fender. Looking nice and fat from the back, too.
![Headbang](https://themustangsource.com/forums/images/smilies/headbang.gif)
I was at the Galpin Mustang and Muscle car show yesterday. (I need a supercharger
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
As others predicted, on the ride to Galpin (about 100 miles) my TPMS Failure alert lit up. So on the way home from the event, I went over to the parts counter to buy the tool. Parts man told me they don't sell any tools. "ANY" tools? Nope. No tools here.
So I walk next door to the service check in place and talked to a man if they had time to set them for me. He said, sure just bring the car over and I will do it for you now.
I did and it took him about 2 minutes as he had the tool they don't sell.
![Frown](https://themustangsource.com/forums/images/smilies/frown.gif)
#22
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: September 8, 2009
Location: Santa Barbara, California
Posts: 282
Likes: 0
Received 3 Likes
on
3 Posts
Thats a nice tool. Electronic depth micrometer. I have some mechanical dial calipers with a depth guage on the end. And a set of mechanical depth micrometer from 0 to 1 inch. I use the end of the calipers.
#23
Cobra R Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: August 9, 2007
Location: Philadelphia
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Fred_Garvin
2010-2014 Mustang
4
9/17/15 04:10 PM
M3hunter
Suspension, Brakes, and Tire Tech
5
9/10/15 09:26 AM
tj@steeda
2015 - 2023 MUSTANG
0
9/8/15 10:45 AM