STEEDA SPYDER WHEELS BACK ON THE SHELF!
We typically go with a 315/35/20 in the rear, that is with our springs. You may want to go slightly smaller if you are lowered more than 1 1/2 inches in the rear OR you should also consider an adjustable panhard bar.
With the left offset these rear ends have which moves it even farther when its lowered you may get the right rear to rub on the inside if you are lowered 1 1/2 inches or more, but with a panhard bar you can adjust the rear end back in towards centerline and correct the rubbing issue.
Gus
With the left offset these rear ends have which moves it even farther when its lowered you may get the right rear to rub on the inside if you are lowered 1 1/2 inches or more, but with a panhard bar you can adjust the rear end back in towards centerline and correct the rubbing issue.
Gus
They don't stick out. This is un-lowered and stock panhard rod. The after market rod got the wheels centered better when I lowered it.

Lowered and centered but not straight from the rear forgot to get one like that.

Lowered and centered but not straight from the rear forgot to get one like that.
Last edited by 908ssp; Aug 30, 2010 at 07:59 PM.
How much do these weigh?
Thread
Thread Starter
Forum
Replies
Last Post
ustabawannab
Suspension, Brakes, and Tire Tech
5
Aug 5, 2015 08:32 PM
tj@steeda
2015 - 2023 MUSTANG
0
Jul 30, 2015 06:47 AM
tj@steeda
Ecoboost
1
Jul 25, 2015 06:32 PM




