Reviews and Experience with Aluminum DS
#1
Member
Thread Starter
Join Date: June 22, 2014
Location: CA to WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Reviews and Experience with Aluminum DS
Hello:
I am thinking about changing my stock driveshaft to aluminum one but I see there are few different brands of them. Some with adaptor and some without. I was wondering if you could share your experience with different aluminum DS that you have used.
Thanks.
I am thinking about changing my stock driveshaft to aluminum one but I see there are few different brands of them. Some with adaptor and some without. I was wondering if you could share your experience with different aluminum DS that you have used.
Thanks.
Last edited by wrkhrd; 6/22/14 at 10:35 AM.
#2
Welcome too the zoo bro. Not sure what model you have but I have an 11 3.7 and purchased my one piece aluminum driveshaft from American Muscle. Its manufactured by the Axle Exchange and has excellent quality according to all the research I could find. I'm glad I purchased one based on how I like to operate my pony on an occasional times. Ha ha ha ha.
#4
Legacy TMS Member
I did a lot of research as it is not an inexpensive mod. It seems that most people are satisfied with the manufacture they picked. The install can run into problems if directions are not followed precisely. I run a Shaftmasters DS as it does not use an adapter plate and customer satisfaction rate for the last 2 years is 99 percent.
#5
Mach 1 Member
I decided on the DSS driveshaft. Mainly for the cv joint and the 1350 u joint. I'm lowered, so with the DSS when I checked my pinion angle was fine. It all comes down to what you want out of the product.
#6
GT Member
Join Date: October 7, 2012
Location: Clermont, FL
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
- 20lbs lighter than stock
- Quicker acceleration
- More responsive engine
- http://www.americanmuscle.com/2011-g...riveshaft.html
#7
Member
Thread Starter
Join Date: June 22, 2014
Location: CA to WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
- 20lbs lighter than stock
- Quicker acceleration
- More responsive engine
- http://www.americanmuscle.com/2011-g...riveshaft.html
[QUOTE+ smoothed out the driveline nicely.[/QUOTE]
And this is another reason.
I don't really plan to lower the car. Although I like the stance of 1-1.5" lowered Mustangs but since my car see great deal of city driving, bumps and potholes, I'd rather to stay with the stock height.
What is this CV joint with DSS and the other don't? Although that may help with pinion angle but cant that be a weak link compare with the others?
Thanks for all the replies. Please keep them coming.
#8
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes
on
4 Posts
https://themustangsource.com/f726/cl...4/#post6816836
If you guys search a bit, this subject has been well covered.
Last edited by cdynaco; 6/22/14 at 08:31 PM.
#11
Mach 1 Member
You're going to have to research every possible option to see which fits your needs and budget. Read as many reviews, watch as many videos, and talk with as many vendors as you can to help base your opinion. It's what I do for everything I buy, literally everything except groceries.
#12
My question is why would you change the DS??? I have never meet or heard of anyone not having an issue. Also saving a few pounds Really How much of a difference does it really make on a street car? Nothing!!
That is one MOD that I have never heard of anyone getting their moneys worth.
If any one has please let me know As I would like to learn more??
That is one MOD that I have never heard of anyone getting their moneys worth.
If any one has please let me know As I would like to learn more??
#13
Cobra R Member
My question is why would you change the DS??? I have never meet or heard of anyone not having an issue. Also saving a few pounds Really How much of a difference does it really make on a street car? Nothing!!
That is one MOD that I have never heard of anyone getting their moneys worth.
If any one has please let me know As I would like to learn more??
That is one MOD that I have never heard of anyone getting their moneys worth.
If any one has please let me know As I would like to learn more??
It also means less rotating mass for the engine to move, so there's a bit less power loss from the drive train.
Is it a huge improvement? Not really, but most mods don't offer huge improvements anyways, especially under $1000.
Plus for the V6 guys it offers more peace of mind if you track the car.
#14
It seems a lot of folks who replace the drive shaft find the driveline vibrations are seriously reduced or completely gone.
It also means less rotating mass for the engine to move, so there's a bit less power loss from the drive train.
Is it a huge improvement? Not really, but most mods don't offer huge improvements anyways, especially under $1000.
Plus for the V6 guys it offers more peace of mind if you track the car.
It also means less rotating mass for the engine to move, so there's a bit less power loss from the drive train.
Is it a huge improvement? Not really, but most mods don't offer huge improvements anyways, especially under $1000.
Plus for the V6 guys it offers more peace of mind if you track the car.
Thank you I was always wondering about this. I can see for racing but not for street use.
#15
Cobra R Member
#16
Mach 1 Member
#19
Cobra Member
Join Date: February 13, 2011
Location: Southern NH
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
Some owners report a clunk when moving at low speeds like in your driveway or parking lots. My driveway is sloped and I got this noise, and my DSS shaft eliminated it. It also just 'feels' that the engine torque is delivered to the rear end more smoothly.
My favorite test is to make a run onto the highway on your favorite on ramp where you can rip off a few 6-7k shifts BEFORE upgrading and then after.
The DSS shaft is more expensive than Shaftmasters, but you can get 10% off at Lethal during the holiday sales. The install with the DSS was very easy too.
My favorite test is to make a run onto the highway on your favorite on ramp where you can rip off a few 6-7k shifts BEFORE upgrading and then after.
The DSS shaft is more expensive than Shaftmasters, but you can get 10% off at Lethal during the holiday sales. The install with the DSS was very easy too.
#20
Mach 1 Member
My question is why would you change the DS??? I have never meet or heard of anyone not having an issue. Also saving a few pounds Really How much of a difference does it really make on a street car? Nothing!! That is one MOD that I have never heard of anyone getting their moneys worth. If any one has please let me know As I would like to learn more??
Last edited by Thamac15; 6/23/14 at 12:21 PM.