Magjackpad

We warranty for life! Also we do offer the heavy use pads if you use them allot at a discount if you have standard jack pads. Just the cost of shipping and the units.

Joeywhat

OK, I'll keep that in mind. I don't think it's going to be an issue...it just seems like the pinch weld has a raised area on the rear that just barely gouges into the pad. I don't think it'll break through since it's not much higher then the rest of the pinch weld.

Magjackpad

We never seen them wear though, but if the car is lifted at a very high angle it may want to bend the inside leg off, that's why we offer the Universal that fits most other cars as well and are aluminum.

Magjackpad

Yes at first you will see a gouge until both panels nest into the grove of the pad.
We tested with a sharp edge and never went though the material.
We will always answer the phone day or night! We stand behind the product.
That is why we will send them to the customer and they pay AFTER they get the items not before!

Bill Hemmingsen

Just placed an order for my gt. If I like them I'll have to get some for my civic Si too.

Magjackpad

Let me know if some works on the Civic. We will give you some no charge or credit you. Thanks

dave07

Bought some of these a couple of days ago. Which shipping carrier do you use?

Magjackpad

USPS with tracking. Should be 2 to 3 days

Marcin K.

Just got a pair of plastic and aluminum jack pads in the mail. They look great and work very well. I found that with my jack the aluminum works better, but plastic works perfect for the jack stands. I really like the product, and I highly recommend it. Thanks John.

Here's a few photos.

kbmag1

Which pads would you recommend for 2011 & 2012 focus, 2010 fusion sport and the mustang gt 2011 with and without roush side splitters?

Gabe

I might be interested in a plastic set, what's the current price?

Magjackpad

The universal will work for most all cars. Prices are here. Www.zl1addons.com

JoeMidnight

PM sent..... have a couple of questions for you.

UltraKla$$ic

I want the Roush Mustang Premium MAGPAD for my GT with Roush side splitters.

Here is a pic of the clearance with the jack all the way down



Will the Premium MAGPADS fit in here and is there a forum discount??

Magjackpad

Our premium jack pad will work fine with your set up. make sure you order the Premium Mustang universal, for Roush

wonger

Just an FYI these did not work very well for my jack on the '13 Boss. They won't work for the rear anyway, but even the front touched the side skirts before I put a steel plate on the jack pad. The adapter was small enough that it sat on the rubber in the center of the jack pad and allowed the sides to touch the skirt. I made a plate to sit on top of the jack instead. You may also be able to flip the jack pad upside down as well.

Magjackpad

We make a MAGPuck for your type Jack see them here. Www.zl1addons.com

Magjackpad

They are back in stock now

solscooter

Ordered! Going to see if by some chance they work on a 67 stang as well.