2010-2014 Ford Mustang S-197 Gen II Lets see your latest Pics PHOTO GALLERY
Shelby GT500 Member
Joined: December 20, 2011
Posts: 4,326
Likes: 53
From: CenTex...sort of
Their kit comes with a twin 75mm T/B that I'm going to try. What size is your monoblade?
GT Member
Joined: February 5, 2014
Posts: 147
Likes: 1
From: New Jersey
Legacy TMS Member
Joined: January 6, 2006
Posts: 14,053
Likes: 166
From: Bay Area, CA
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Last edited by laserred38; Dec 22, 2014 at 09:04 AM.
Cobra R Member
Joined: September 22, 2012
Posts: 1,690
Likes: 17
From: Ontario, California
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
Legacy TMS Member
Joined: January 6, 2006
Posts: 14,053
Likes: 166
From: Bay Area, CA
Roush Forum Stalker
Joined: March 9, 2013
Posts: 11,140
Likes: 1,749
From: Massachusetts
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Love the stance, the wheels and those exhaust tips really set the car off. LOVE the wheels on that car.
Legacy TMS Member
Joined: January 6, 2006
Posts: 14,053
Likes: 166
From: Bay Area, CA
Mach 1 Member
Joined: March 27, 2014
Posts: 919
Likes: 0
From: Winnipeg, MB
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Car looks amazing man. Great look all around. Love it.
Roush Forum Stalker
Joined: March 9, 2013
Posts: 11,140
Likes: 1,749
From: Massachusetts
V6 Member
Joined: August 2, 2013
Posts: 87
Likes: 0
From: Nebraska
Legacy TMS Member
Joined: January 6, 2006
Posts: 14,053
Likes: 166
From: Bay Area, CA
V6 Member
Joined: August 2, 2013
Posts: 87
Likes: 0
From: Nebraska
I Have No Life
Joined: September 24, 2011
Posts: 10,141
Likes: 172
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had.... I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light. Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
