now I lost my sig..now it's back, added some old shots. I'm adding some stuff this weekend, I will post more pix (headlight splitter and DG side louvers)

 

+1

Where the pics. at ?!??

 

Right above you on the - picture- link that's blue in color is all I found.

 

Hey guys I thought I would add a couple of shots. Just finished the stripes and rear wing. SOon I will be adding some clear front and side markers as well as a custom rear fake gas cap of my own design.

 

Nice custom look - the clear markers will be even nicer!!

 

Thanks, I can't wait to change out the lights I think it will "complete" the look.

 

I like it!

I really like the hood stripe... I was thinking of doing the same thing in red... Did you get yours from Baltimore Street Mods?

 

Yep Hood stripe is from BSM I will say that the single fat stripe is indeed a real kick in the nutz to install. Goes on fine until you get to the bottom of the hood about the last 10 inches or so. I found that if you peel back the paper and use a hair dryer and lots of solution it is easier. You still have to fight and work the thing into submission . I think the results are worth the effort but be prepared to spend some time here.

 

I finished the custom gas cap. What do you guys think?

 

Yeah, I had a funny feeling that stripe would be a PITA... I still might try doing it, for the price, you can't beat it! We'll see...

And I am diggin' the Gas cap! Is it an overlay or a custom job?

 

I like the gas cap, David. How did you do that?

 

I got a take off gas cap from a local custom shop here in Tulsa and ordered the center piece from Mustangs unlimited. It's for a 68 cobra jet. Once I figured out that I could not overlay the stocker I used my dremel tool to remove the entire center of the factory cap, worked the bevel just right so that the contour of the new emblem fit just right and put the new one in from the inside and afixed it with JB weld. I then back filled the void with hot glue which was light weight and solid and used industrial 3m tape to adhere back to the trunk lid. Sounds more complicated than it actualy was. The custom cap thing is a great mod for people wanting somthing different. Just find somthing you like thats round, concave and will fit into roughly a 3 1/4 inch opening and wala. I just wasn't feeling the same old same old that everyone and there brother has. I wanted somthing that no one else would have.

 

Here's mine....
http://s60.photobucket.com/albums/h1...nt=smallgc.jpg

 

I like it!

 

Thanks for the how to. Now I need to find a gt350 emblem then, preferably the red and blue one and see I I can copy whay you did.

 

On post number 74 of this thread I saw this. It sortov gave me the inspiration for what I did.

 

thats the logo I want but I want it in the original red and blue. So many projects, so little time (or money)

 

Hey nole, What front turn signal lamps are you using with the clear lens? Do they turn amber when lit up?

 

Yes they are very amber when lit up, a must have....avoid the egg yolk look...but beware they are not cheap (but I've given up on cheap mods). There are tons of threads on this issue.....

http://www.stealthauto.com/Store/Pro...roductid=SBCA2

 

Finally did some mods to my 2006 white GT. Shelby wheels and Legend splitter. To come are GT/CS rear bumper and Shelby spoiler (haven't decided which brand yet). I was going with the full Shelby front end but I like the fogs in the grill too much (plus its $$$).