Let's see your interiors!
#1
Let's see your interiors!
INTERIOR MODS
• Stainless Steel Dead Pedal (Stangdeadpedals.com)
• Custom Gear Shift Ball (Grabberpony.com)
• Billet E-Brake Handle (Silverhorseracing.com)
• Head Rest Cover Wraps with GT Logo (Granddesignmat.com)
• Black Cherry Wood & Brushed Aluminum Dash Trim (Wooddash.com)
I recently added the floor mats (for show only) and trunk mat.
• Stainless Steel Dead Pedal (Stangdeadpedals.com)
• Custom Gear Shift Ball (Grabberpony.com)
• Billet E-Brake Handle (Silverhorseracing.com)
• Head Rest Cover Wraps with GT Logo (Granddesignmat.com)
• Black Cherry Wood & Brushed Aluminum Dash Trim (Wooddash.com)
I recently added the floor mats (for show only) and trunk mat.
#2
- Autovation aluminum pedals
- PMP billet Raptor shiftlight mount (no longer available)
- Raptor shiftlight
- Alpine W205
- MGW climate control *****
- MGW shifter with composite Racer ****
- SOS cupholder switch panel
- Autometer Voltmeter gauge
- (not pictured: A-pillar 3-gauge pod, other MGW pieces, window tint, trunk release switch, Meziere buzzer, etc.)
#3
Interior Mods
- Pioneer FH-P8000BT Head Unit
- SilverHorse Racing Polished Billet Cup Holder Bezel
- SilverHorse Racing Polished Billet E Brake Handle
- SilverHorse Racing Polished Billet Climate Control *****
- SilverHorse Racing Polished Billet Shifter Bezel
- SilverHorse Racing Chrome Door Lock Pins
- SilverHorse Racing Chrome Mirror Adjustment ****
- SilverHorse Racing Carbon Fiber Dash Kit
- MGW Two Tone GT Outlet Plug
- Hurst STS With Optional Black ****
#4
This is what interior looked like last racing season. The interior is being gutted again...not sure how it will look. Know a/c and stereo system have been deleted. Shifter has been changed from 3 speed with the 4r70w, to 2 speed with the newly installed powerglide transmission.
Last edited by forensicsteve; 9/12/09 at 08:53 PM.
#6
#7
it has that gap, the piece is flat and the console is curved
see this one, perfect, but 189 ouch it's from the bullitt?
http://northamericantuning.com/catal...roducts_id/448
see this one, perfect, but 189 ouch it's from the bullitt?
http://northamericantuning.com/catal...roducts_id/448
Last edited by fdjizm; 9/12/09 at 09:20 PM.
#8
05stangkc is a moderator on this site. He can get the factory shift boot with the bezel at a good price.
https://themustangsource.com/member.php?u=92873
https://themustangsource.com/showthread.php?t=421531
https://themustangsource.com/member.php?u=92873
https://themustangsource.com/showthread.php?t=421531
#9
Get a pic of an '06 with the regular IUP, and twist the manual shift **** 45 degrees to the right. That's it, at the moment.
That's not how it's staying, though, but it's not all ready yet... Maybe soonish... just figured out the last bit of 'technical' info I needed, and the days have been ultra crappy, and I don't have a shed/garage to play in.
/Hm... maybe my bro's new garage at his house with the A/C in it... That'd fix the humidity...
//No, unfortunately, it'll be full of crap soon. Just like the old one. Heh.
That's not how it's staying, though, but it's not all ready yet... Maybe soonish... just figured out the last bit of 'technical' info I needed, and the days have been ultra crappy, and I don't have a shed/garage to play in.
/Hm... maybe my bro's new garage at his house with the A/C in it... That'd fix the humidity...
//No, unfortunately, it'll be full of crap soon. Just like the old one. Heh.
#10
it has that gap, the piece is flat and the console is curved
see this one, perfect, but 189 ouch it's from the bullitt?
http://northamericantuning.com/catal...roducts_id/448
see this one, perfect, but 189 ouch it's from the bullitt?
http://northamericantuning.com/catal...roducts_id/448
#13
#15
Flaminexpress, that is one custom interior. It looks like something you would see at SEMA. How were the door panels made?
cdynaco, the stock Bullitt interior with the serial plate is awesome. I love the Bullitt dash, gear shift, seats and steering wheel.
cdynaco, the stock Bullitt interior with the serial plate is awesome. I love the Bullitt dash, gear shift, seats and steering wheel.
#17
The door panels where fabercated by Johnathan Demuth ( owner / CEO ) T3 Audio. He took the original door panels,cut and molded everything ,as for materials he used, fiber glass,wood,carbon fiber, plexi glass and a lot of know how. Yea , it was suppost to go to this years SEMA,but the painter messed up, so now the paint on the car needs to be stripped! ( too many layers of paint) Since it will be completely stripped, new plains are in the works for the exterior color, will up-date at a later date.
#18
I love threads like this! Seeing nice clean interiors gives me great inner peace.
My contribution:
OEM shifter bezel from 05stangkc
OEM SIRIUS from 05stangkc
OEM GT500 pedals from 05stangkc
CDC dead pedal
SHR window switch plates
SHR cupholder bezel
SHR floor mats
MGW e-brake handle
MGW concept shift ****
MGW GT power outlet plug
MGW radio ****
UPR stock style door pins
Custom footwell lighting
My contribution:
OEM shifter bezel from 05stangkc
OEM SIRIUS from 05stangkc
OEM GT500 pedals from 05stangkc
CDC dead pedal
SHR window switch plates
SHR cupholder bezel
SHR floor mats
MGW e-brake handle
MGW concept shift ****
MGW GT power outlet plug
MGW radio ****
UPR stock style door pins
Custom footwell lighting
#20
It comes with velcro pre-adhered to the correct spots. A 20 oz coke/water bottle or starbucks coffee will fit in the rear one while nothing bigger than a soda can will fit in the front (I have a nissan stainless coffee cup that's sorta tapered and it fits in the front). Which is the reason for the velcro... if you and your honey both have a 20 ozer, you can just pick it up and toss it in the ceter console.
Last edited by spike; 9/15/09 at 11:34 AM.