SilverHorse Racing Rear Medallion Replacement
#121
Cobra Member
Plain door pieces in both black anodized and chrome plated finishes are in stock! Polished shouldn't be too long off, but I haven't got them back yet. Price is the same as for the GT door, and you can order the GT door on our website and just put an email off to us that it needs to be the plain one until I get a chance to update the website.
Thanks!
Thanks!
Thanks,
-danny
#122
Legacy Tms Member
Thread Starter
The OEM one for an 05+ is part of the center medallion and is not available separately. You can use a tri-bar or other emblems from most of the early cars, as the door is flat on this design and 4.00" in diameter on the flat area before the recess.
#124
#125
Legacy Tms Member
Thread Starter
We had the "classic" style vertical bar ones on sale for 10.00 off, but I just took down the sale from the webstore. If you're interested in one of the classic finish ones, I'll honor the sale if you email me directly in the next day or so, as I didn't see this post in time to answer you before it ended.
#128
Legacy Tms Member
Thread Starter
Only what we have up there I think.... let me look...
Yeah, I only have two customer-submitted photos of black anodized parts installed on cars, although it is one of our most popular finishes we sell... go figure.
Yeah, I only have two customer-submitted photos of black anodized parts installed on cars, although it is one of our most popular finishes we sell... go figure.
#129
Team Mustang Source
Join Date: August 8, 2005
Location: Georgia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Attachment 15561
Attachment 15562
#131
Mach 1 Member
Join Date: October 20, 2005
Location: Honolulu, Hawaii
Posts: 874
Received 0 Likes
on
0 Posts
my camera is junk, but here is a pic of my medallion. i still have to cut off the rear posts from the emblem, but here is what i am planning on doing. the emblem seems a bit small, so last night, i also ordered the same emblem about 2x the size. that will take a little over a week to arrive i think. i will wait till i get that one to decide which to use. i think the large one may be TOO large.
#132
Well, I just got mine and got it installed so here are a couple more pics of the Black...with a panel.
Attachment 15561
Attachment 15562
Attachment 15561
Attachment 15562
#133
Cobra Member
Now this I like A LOT! Please post an image with the larger emblem when you get it!
-danny
-danny
my camera is junk, but here is a pic of my medallion. i still have to cut off the rear posts from the emblem, but here is what i am planning on doing. the emblem seems a bit small, so last night, i also ordered the same emblem about 2x the size. that will take a little over a week to arrive i think. i will wait till i get that one to decide which to use. i think the large one may be TOO large.
#135
Legacy Tms Member
Thread Starter
Soundwave,
While we couldn't put OEM logos on the medallion for our customers due to trademark rights, we are glad to produce a piece that is so "adaptable" to custom finishing by our customers BTW - even with the small one, that looks nice, and is going to look great on the car.
Brad, yours is on the way, I made it custom this morning before leaving to continue setup at PRI. And guess what? For the first time in two years, the #05 car got waxed today! Of course, now everything just slides off, which is bad for display stuff, but it's all good, she is going to look great under the lights.
While we couldn't put OEM logos on the medallion for our customers due to trademark rights, we are glad to produce a piece that is so "adaptable" to custom finishing by our customers BTW - even with the small one, that looks nice, and is going to look great on the car.
Brad, yours is on the way, I made it custom this morning before leaving to continue setup at PRI. And guess what? For the first time in two years, the #05 car got waxed today! Of course, now everything just slides off, which is bad for display stuff, but it's all good, she is going to look great under the lights.
#137
Mach 1 Member
Join Date: October 20, 2005
Location: Honolulu, Hawaii
Posts: 874
Received 0 Likes
on
0 Posts
marcello, thanks again for keeping me updated with the medallion. not sure if you know who i am, but thanks. yeah, i think the small gt looks good, but i want to wait to see how the large one looks before i decide. love being able to customize it.
afblue.... thanks man. i think it goes great with my 65 gt side emblems. i was trying to figure out a way to modify a 68 gas cap, but this way is so much easier.
afblue.... thanks man. i think it goes great with my 65 gt side emblems. i was trying to figure out a way to modify a 68 gas cap, but this way is so much easier.
#138
Marcello, my medallion arrived today, and I cannot believe the quality of this item And frankly, it concerns me. This level of craftsmanship is unholy, have you made a deal with the devil?
I can't wait to get it installed, though it won't be for at least a week. My car is getting painted Friday, and the back trunk panel is going to be flat black. So I think the brushed aluminum will look outstanding on that Thank you again.
I can't wait to get it installed, though it won't be for at least a week. My car is getting painted Friday, and the back trunk panel is going to be flat black. So I think the brushed aluminum will look outstanding on that Thank you again.
#139
Legacy Tms Member
Thread Starter
LOL - I appreciate it, but no deals with him - yet... although I sometimes wonder if I'm not falling into the trap like in "the Devil's Advocate" or something...
I just decided that as a customer, I wasn't happy with what was being made for the Mustang, and if you're going to make a piece that is basically for appearance, well then it better at least look good, right? If it's a subframe connector, then maybe a little weld spatter or rough paint is okay, but if you want something to be there because of it's looks, then it should at least do that part well.
Hopefully sometime next year we'll start playing with performance products I want to do as well... although as busy as we are with appearance products, I'm thinking we're going to have to add more staff to do them justice.
I just decided that as a customer, I wasn't happy with what was being made for the Mustang, and if you're going to make a piece that is basically for appearance, well then it better at least look good, right? If it's a subframe connector, then maybe a little weld spatter or rough paint is okay, but if you want something to be there because of it's looks, then it should at least do that part well.
Hopefully sometime next year we'll start playing with performance products I want to do as well... although as busy as we are with appearance products, I'm thinking we're going to have to add more staff to do them justice.