Rear Medallion Replacement Opinions
Thread Starter
Mach 1 Member
Joined: July 13, 2007
Posts: 687
Likes: 11
From: LaSalle, Ontario
Here are some pictures of the emblem
The inside part that would screw into the gas filler neck is removable. There were only 3 screws holding it in. I am going to look at getting some bondo filler this weekend and get the rear filled, but I am going to try a test fit first on the back to see what it looks like.
The quality of the emblem is excellent. It is a solid piece of billet aluminum. The black powder coat on it is perfect.
The inside part that would screw into the gas filler neck is removable. There were only 3 screws holding it in. I am going to look at getting some bondo filler this weekend and get the rear filled, but I am going to try a test fit first on the back to see what it looks like.
The quality of the emblem is excellent. It is a solid piece of billet aluminum. The black powder coat on it is perfect.
Mach 1 Member
Joined: September 21, 2011
Posts: 746
Likes: 3
Originally Posted by SeanD
Here are some pictures of the emblem
The inside part that would screw into the gas filler neck is removable. There were only 3 screws holding it in. I am going to look at getting some bondo filler this weekend and get the rear filled, but I am going to try a test fit first on the back to see what it looks like.
The quality of the emblem is excellent. It is a solid piece of billet aluminum. The black powder coat on it is perfect.
The inside part that would screw into the gas filler neck is removable. There were only 3 screws holding it in. I am going to look at getting some bondo filler this weekend and get the rear filled, but I am going to try a test fit first on the back to see what it looks like.
The quality of the emblem is excellent. It is a solid piece of billet aluminum. The black powder coat on it is perfect.
Cobra Member
Joined: September 9, 2009
Posts: 1,344
Likes: 4
From: OKC, OK
theres some real nice center emblems on ebay, really nice clear bubble kinda decals that really look good for pretty cheap. my tri bar looked real bad so i covered it up with one. been a couple years so i dont remember who the place was but its held up nice and still looks good. i really like the plain chrome one from cj`s as it cover the key hole
http://www.bobwhitedecals.com/Products/2005/05REO.htm
Also been wanting to check these out for the visors.
http://www.bobwhitedecals.com/Products/2005/05VISOR.htm
Thread
Thread Starter
Forum
Replies
Last Post
RRRoamer
2015 - 2023 MUSTANG
33
Jan 19, 2017 05:27 PM
Mackitude
2010-2014 Mustang
1
Aug 17, 2015 04:14 PM