05YellowGT

I got mine on this past weekend, I already had the SHR panel on and they look pretty good together. But I've also got the one you have, I replaced it years ago with the SHR panel, and I had the same idea as you about painting the back side black. I think being shiny it matches the lights better, to bad they didn't make a center panel to match the one on the 13's, after seeing yours I may have to pull the SHR panel off and put the other one on

Fnfast

I like how it matches the taillights perfectly once I plasti dipped the back side.
Post up pics once it's done!!

Doogie

For those looking to buy a set, I would recommend referencing the March MM&FF magazine ad as it lists these for the intro price of $369.

Centurion96

@ anyone who has these in their hands and has not yet installed them. Can you post some pictures of the wiring harness on them and also where the control module is located? I currently have Web-Electric sequentials on my '07 and I did the recommended mod to make them not sequence when you step on the brakes. I have seen these Gen5s in video and it is obvious that the control module is triggered by the brake light voltage. I'm trying to see if the trigger input is spliced into the brake wire before or after going into the control module. The mod I speak of requires tapping into the hot wires going to the front left and right turn signals and using those voltages as the trigger for the left and right rear modules respectively. No turn signal, no trigger, but the brake light voltage goes through the module and all lamps light as one.

BB

Boomer

Bob, you don't have to spam the same comment across multiple threads on the topic.


Thx

synar

It's the only one i have;

Centurion96

Thanks synar, I'll try to magnify it when I get home.

@Boomer, sorry.

SF

V6S197

I did mine about a month ago :thumbsup:

SilverSkoundrel

Lol^

Rash

I was hoping that it just had this appearance in photos, but looked more solid in person. Can anyone comment on this? It's the only thing making me hesitant to purchase.

synar

I thing it depends on the distance you are looking at them, at a foot close, yes you see the dots but at a 10 feet distance they look great, like neon lights. Overall, they look great !

AGBULLIT

Videos of Raxiom Gen5 tail lights on my 2007 Mustang GT.

SilverSkoundrel

cool picture

Boomer

Finally got the car out today.
First thing to do.... install the lights


Blackout panel was just sitting on the decklid. It'll get installed in the next couple days. It was already pretty dark at that point and I'm not sure if I need to Plastidip the backside.


I'll see what it looks like in the daylight and if it needs a spray to be darker.

Evil_Capri

Looks great!!

Boomer

I got one of the first sets, back in Oct. So I'm not sure if they improved any of the issues.

Grommet is a bit too loose for my liking. It snaps in, but its not as much of a tight fit as the stock ones. I put a silicone bead on the inside just in case, as well as on the mounting nuts to stop any moisture from getting in.

Left side light was a pain to get in. Had to give it some...encouragement to go in properly.
Right side lined up without any issue.

They do look amazing.
I see what people are talking about with the 'connect the dots' in the ring. Its not as smooth and uniform as the stock 13-14, but its nowhere near as bad as people put it out to be.

Javdog

Looks awesome with the blackout panel

Boomer

Yeah my wife was unsure until I put the panel up for the pic.
It really does define the rear end.

Centurion96

They are good looking but it would have been nice if they would have designed a sequencer so that they operated like the 13-14 taillights. The 13-14 taillights have the outer ring work with the inner LEDs when the headlights are off. They sequence with the inner LEDs when the turn signal is active and come on when the brakes are applied. I believe this was done for greater visibility during daylight hours as they just remain on and don't sequence when the headlights are on.

I was really gung ho for these lights until I observed that whatever sequencing logic they used was inferior to the factory lights which for some reason appears to be typical for what comes out of China. Lets see if AM has any control over the products they sell and can get that fixed as well as some of the fitment problems.

Not trying to be a party pooper but for $400 you would think that they would be exact copies of the factory product and they would fit properly.

Boomer

If you want the 13-14 light exactly, you'll have to get a 13-14.
This is a pretty **** good compromise.