WMS Ram-Air Tray Installed
#61
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 05STG1@September 20, 2005, 3:01 PM
......... Remember, I gained almost 10 peak HP bolting on the air kit, and that was without a tune, and the A/F ratio within stock range....
......... Remember, I gained almost 10 peak HP bolting on the air kit, and that was without a tune, and the A/F ratio within stock range....
Don, see quote above. You should be almost convinced by now,unless im lying....or something. The A/F ratio didnt go lean or leaner, BRENSPEED also stated this as well with their testing, maybe you missed that thread.
So dont take my word on it......
blackhat,
I thought you were MIA for a bit. Stripes,battery done. Now I need to figure out if I could place the ZEX nozzle 2 inches in front of the TB or not...lol issues...now Nitrous !!
![Big Grin](https://themustangsource.com/forums/images/smilies/biggrin.gif)
Dont sweat the sock stuff, all good
![Smile](https://themustangsource.com/forums/images/smilies/smile.gif)
#62
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Originally posted by 05STG1@September 20, 2005, 8:47 PM
Don, see quote above. You should be almost convinced by now,unless im lying....or something. The A/F ratio didnt go lean or leaner, BRENSPEED also stated this as well with their testing, maybe you missed that thread.
So dont take my word on it......
Don, see quote above. You should be almost convinced by now,unless im lying....or something. The A/F ratio didnt go lean or leaner, BRENSPEED also stated this as well with their testing, maybe you missed that thread.
So dont take my word on it......
#63
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Are we talking numbers, or A/F ratio's here..?
Im not saying u were calling me a liar, but I had no other way to phrase that clearly, beasides..BRENSPEED also tested this as well. So if me and BRENSPEED both encountered mis-leading A/F ratios..thats some coincidence for sure.
I understand what your saying about the differences in dynos and numbers and yes they do vary.Personally, I trust my tuners Dyno and wideband, and have no doubts with their numbers or especially their skills. That wideband is checked and re-checked all the time, its accurate all right. This WMS intake didnt lean me out to gain power.
(not towards Don)
Why do some insist that the WMS cant possibly be a good intake? Im no WMS salesman or anything..but it cracks me to see this. Because it's new, it's no good? Who knows, I love mine. All I need is the filter, and then we could see ACT numbers as well.
Im not saying u were calling me a liar, but I had no other way to phrase that clearly, beasides..BRENSPEED also tested this as well. So if me and BRENSPEED both encountered mis-leading A/F ratios..thats some coincidence for sure.
I understand what your saying about the differences in dynos and numbers and yes they do vary.Personally, I trust my tuners Dyno and wideband, and have no doubts with their numbers or especially their skills. That wideband is checked and re-checked all the time, its accurate all right. This WMS intake didnt lean me out to gain power.
(not towards Don)
Why do some insist that the WMS cant possibly be a good intake? Im no WMS salesman or anything..but it cracks me to see this. Because it's new, it's no good? Who knows, I love mine. All I need is the filter, and then we could see ACT numbers as well.
#64
Think I'll jump into this controversual topic.Not with any scientific data or dyno data to support my thoughts about this new CAI from WMSRacing.I did install mine along with the air box all went smooth but still didn't like the fact i had to cut the maf connection and splice in a piece.I am running stock except for the WMS CAI and haven't dyno'd it but as Blackhat has stated there clearly is damm good amount of increase in proformance from this.throttle response is much better and excelleration is much quicker. and the gas milage improvement is very noticable. I am averaging around 3 miles to gal increase since the install.Overall I think this was a good investment will be looking for tuners to eventuall provide additional improvements.
#65
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
zoomerman,
Thank u for saying that.
These intake are so new, there's barely any out there right now, at least not that I have seen or read anywhere online.
Soon enough like I stated, word of mouth will get out, good products sells themselves. I and believe this is one of those products.
For me to gain that w/out a tune, Im happy.
zoomerman, u gained around 10 peak HP and a few lbs TQ down low. But...this ram-tray is awesome when running down the road. Seal the top off, and you'll be happier, more fresh air only to the filter, not underhood heat.
Im sure when I get back to JDM those tunes would be available somehow for those interested, I could always ask. Once they run their magic, I think we will all be impressed with this true CAI intake's potential.
Of course...this is my opinion, and I have many of them
Thank u for saying that.
These intake are so new, there's barely any out there right now, at least not that I have seen or read anywhere online.
Soon enough like I stated, word of mouth will get out, good products sells themselves. I and believe this is one of those products.
For me to gain that w/out a tune, Im happy.
zoomerman, u gained around 10 peak HP and a few lbs TQ down low. But...this ram-tray is awesome when running down the road. Seal the top off, and you'll be happier, more fresh air only to the filter, not underhood heat.
Im sure when I get back to JDM those tunes would be available somehow for those interested, I could always ask. Once they run their magic, I think we will all be impressed with this true CAI intake's potential.
Of course...this is my opinion, and I have many of them
![Big Grin](https://themustangsource.com/forums/images/smilies/biggrin.gif)
#67
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Nothing better than what I have done already Jeff, but Im hoping when the filter gets back, I can seal it off entirely, only a few open inches, which is real good
.Im sure I'll brainstorm something, and pass it on like always. Yours hasnt shipped out ?
Right now inner fender, and misc pieces are out while I hide the nitrous lines, and hide the solenoids. I had to relocate the WMS reservoir bracket somewhat to hide the install, but nothing that affected the hose lengths.
.Im sure I'll brainstorm something, and pass it on like always. Yours hasnt shipped out ?
Right now inner fender, and misc pieces are out while I hide the nitrous lines, and hide the solenoids. I had to relocate the WMS reservoir bracket somewhat to hide the install, but nothing that affected the hose lengths.
#69
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
ahhh, thats what I figured. Im also waiting on the 95mm as well. I was told this week they should be going out. Im switching from the 80mm, for the larger size, couldnt hurt
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
#70
Originally posted by 05STG1@September 25, 2005, 10:49 PM
ahhh, thats what I figured. Im also waiting on the 95mm as well. I was told this week they should be going out. Im switching from the 80mm, for the larger size, couldnt hurt![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
ahhh, thats what I figured. Im also waiting on the 95mm as well. I was told this week they should be going out. Im switching from the 80mm, for the larger size, couldnt hurt
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
Greek, do you plan to get a tune with the larger filter? or are you still running without a tune? Something I read made me believe you had to have a tune with the larger filter, is that true?
-Ex
#73
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
-Ex,
Yes, a tune w/ the new 95mm is a must. With the 80mm, its not, and the A/F is fine.
Jeff,
Shannon called me last week and said that were yet to get to CNC, not sure if this is the batch with yours, but It sounds like it. Hope u get yours soon...
Yes, a tune w/ the new 95mm is a must. With the 80mm, its not, and the A/F is fine.
Jeff,
Shannon called me last week and said that were yet to get to CNC, not sure if this is the batch with yours, but It sounds like it. Hope u get yours soon...
#75
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
It'll be worth the wait, at least thats what Im telling myself,but Im only waiting on the MAF.I like this cool weather, and so does the NASA tray ![Smile](https://themustangsource.com/forums/images/smilies/smile.gif)
Ask for express delivery for the wait Jeff, Its like 2 days from there.
![Smile](https://themustangsource.com/forums/images/smilies/smile.gif)
Ask for express delivery for the wait Jeff, Its like 2 days from there.
#76
I emailed Shannon yesterday about the 95mm meter....email back said that it will be a week or so yet.....I'm not sure if your 95mm meter is in that same batch GOFISH....
I also asked about the confussion between the 90 and 95mm meters, as far as what size are they actually. Shannon said they have always been 95mm, even the one that Brent tested. They never had a 90mm size....
Just a FYI for those interested...
hags1
I also asked about the confussion between the 90 and 95mm meters, as far as what size are they actually. Shannon said they have always been 95mm, even the one that Brent tested. They never had a 90mm size....
Just a FYI for those interested...
hags1
#77
Hey, does anyone know if BRENSPEED sells the Ram air tray with the WMS or do you have to buy that seperate? If so, can someone list the place where we can buy the whole WMS setup, (besides WMS for all you wisenheimers)
Darth
:jedi:
Darth
:jedi:
#78
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 10, 2005
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Use the force Darth
j/k (im a weisenheimer)
Cant see why they wouldnt sell it with,Im sure they have a package deal. I dont think there is any other vendors at the moement besidesdirect and Brenspeed.
![Big Grin](https://themustangsource.com/forums/images/smilies/biggrin.gif)
Cant see why they wouldnt sell it with,Im sure they have a package deal. I dont think there is any other vendors at the moement besidesdirect and Brenspeed.