GT Performance Mods 2005+ Mustang GT Performance and Technical Information

Video of a mustang w/ Stg. 3 Comp Cams,ZEX,Flowmasters,OR/H,& much more

Thread Tools
 
Search this Thread
 
Old 4/3/07 | 01:28 PM
  #61  
JRay05stang's Avatar
Bullitt Member
 
Joined: December 11, 2006
Posts: 235
Likes: 0
His car has never been dynoed... he makes most of his speculations by what people have told him on some of the other stuff he has posted... I get annoyed when he says stuff like "I used to want a D1SC for my old tungsten 2006 mustang but now I have my 2007 GT/CS and I decided to stay N/A now." he probably will never get half the stuff he says he is putting on the car in the future... unless if money isnt an issue for daddy?
Old 4/3/07 | 01:36 PM
  #62  
JRay05stang's Avatar
Bullitt Member
 
Joined: December 11, 2006
Posts: 235
Likes: 0
I just know that when I was 12 I wrenched on my Go Kart, dirtbike, and bicycle... My dad was restoring his 69' Camaro and I didnt get any say so as to what he did with is cause it was HIS car... its cool to dream of high horsepower cars when you get older, but until you can actually get behind the wheel of that car and feel the horsepower lighting up the tires when you press the gas horsepower is just a number.
Old 4/3/07 | 03:07 PM
  #63  
mustangfan123's Avatar
Thread Starter
Cobra Member
 
Joined: January 12, 2006
Posts: 1,163
Likes: 0
From: Houston, Texas
Well, its not like all the mods will be bought at once. Not all of them will be done probably, but most will. I am a 12 year old mustang enthusiast enjoying reading and making posts about mods, et's and hp gains., not someone trying to make people annoyed or irritated.
Old 4/3/07 | 03:08 PM
  #64  
mustangfan123's Avatar
Thread Starter
Cobra Member
 
Joined: January 12, 2006
Posts: 1,163
Likes: 0
From: Houston, Texas
Originally Posted by Bullitt995
I'm pretty sure he's sitting right there when the car gets dynoed and at minimum sees all the dyno sheets. So he knows what the cars are going to make hp wise. Don't bash people just because they are young. He's well spoken and honestly if he didn't say anything, I would have thaught he was much older.


Thanks for your compliments on my knowledge of mustangs considering my age.Unlike other people.... I appreciate it.
Old 4/3/07 | 03:31 PM
  #65  
VegasGold's Avatar
Bullitt Member
 
Joined: July 11, 2006
Posts: 423
Likes: 0
From: Edmonton, Alberta
I remember working on my cousins 63 vette at that age...I really enjoyed how engines worked, cleaning the parts etc...At that age you either have it or not...That excitement, to learn and dream...Before you know it you have a job and a car and the money to build your dream...Good luck kid...
Old 4/3/07 | 03:46 PM
  #66  
mustangfan123's Avatar
Thread Starter
Cobra Member
 
Joined: January 12, 2006
Posts: 1,163
Likes: 0
From: Houston, Texas
Originally Posted by uberPony
Okay you are twelve years old? Seriously?
You don't own a Mustang yourself, but you pick out mods you want your parents to do to their Mustang?
You claim to be able to predict peoples horsepower results from their mods, but you are not an experienced mechanic or an experienced Mustang racer. In fact, you have never owned a Mustang, yourself? You base your speculation on what? The stuff you have read on here? Just wondering how you, as a twelve year old kid, can make these predictions.

This is bench racing taken to a whole new level........


I can make pretty good estimations based on results I have seen from various websites. To make my estimations I use the most often results.

Like for instance,lets say I have read various write-ups on JLT Air Intakes. Lets say the most common gain is 25rwhp. If I posted what the expected gains would be,I would say 25-30rwhp. Results vary on each car based on humidity,air temp,elevation,and many other variables. My estimations may not be exactly correct but they give people a good idea on what to expect. Also, for your information the car is a FAMILY PROJECT,and I do not pick out the mods 100%, I research them partly.
Old 4/3/07 | 03:56 PM
  #67  
mustangfan123's Avatar
Thread Starter
Cobra Member
 
Joined: January 12, 2006
Posts: 1,163
Likes: 0
From: Houston, Texas
Originally Posted by JRay05stang
His car has never been dynoed... he makes most of his speculations by what people have told him on some of the other stuff he has posted... I get annoyed when he says stuff like "I used to want a D1SC for my old tungsten 2006 mustang but now I have my 2007 GT/CS and I decided to stay N/A now." he probably will never get half the stuff he says he is putting on the car in the future... unless if money isnt an issue for daddy?

Why does it bother you so much that I am 12 and I express my opinions about the car. Isn't me learning about cars better than being a thug?

As my parents always say,"opinions are like ***holes and everyone has one". This is the last response I will make to your and a couple other people's complaints about me.Now lets get back on topic.
Old 4/3/07 | 04:19 PM
  #68  
JRay05stang's Avatar
Bullitt Member
 
Joined: December 11, 2006
Posts: 235
Likes: 0
Do you even know what a warrenty is? If the car you have now is still under warrenty why are you going to do all these mods that will void your warrenty?
Old 4/3/07 | 04:20 PM
  #69  
JRay05stang's Avatar
Bullitt Member
 
Joined: December 11, 2006
Posts: 235
Likes: 0
apparently I cant spell warranty either I sound so college educated sometimes
Old 4/22/07 | 04:28 PM
  #70  
officespace56's Avatar
Cobra Member
 
Joined: March 3, 2007
Posts: 1,187
Likes: 0
From: Eden Prairie, MN
the stingers alone are nice, with the h-pipe = amazing
Old 4/24/07 | 08:46 PM
  #71  
officespace56's Avatar
Cobra Member
 
Joined: March 3, 2007
Posts: 1,187
Likes: 0
From: Eden Prairie, MN
how much for the cams/install??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
YepItsGreen
General Mustang Chat
24
11/26/15 02:14 PM
dohc97
Suspension, Brakes, and Tire Tech
17
9/10/15 10:21 AM
tj@steeda
2015 - 2023 MUSTANG
1
7/21/15 11:32 AM
SpeedCostsMoney
Ecoboost
2
7/20/15 01:47 PM



Quick Reply: Video of a mustang w/ Stg. 3 Comp Cams,ZEX,Flowmasters,OR/H,& much more



All times are GMT -6. The time now is 12:11 PM.