PMM rattles/vibrations- FIXED!!!
3/22/08, 06:16 PM
#22
Super Boss Lawman Member
Thread Starter
It should work for a little while, grinders are only about $50 from home depot and most of them come with the diamond blade. Or maybe you can rent one if you don't find somebody.
3/22/08, 06:17 PM
#23
Super Boss Lawman Member
Thread Starter
3/23/08, 09:59 AM
#24
V6 Member
Join Date: May 21, 2007
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Alright.... so the ghetto fix was succesful!!! Took some old weatherstripping with a hole down the center. I sliced it open, wrapped it around the part that is hitting the hangar, and wrapped it in electrical tape so it would stay put. I intend on this being a short term fix, but it definately did the job. Drove the car about 100 miles this morning and it worked like a charm- no rattles from the exhaust, just the dashboard lol. Thanks guys.
3/24/08, 12:02 AM
#25
Cobra Member
Join Date: September 10, 2004
Location: Austin TX
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Alright.... so the ghetto fix was succesful!!! Took some old weatherstripping with a hole down the center. I sliced it open, wrapped it around the part that is hitting the hangar, and wrapped it in electrical tape so it would stay put. I intend on this being a short term fix, but it definately did the job. Drove the car about 100 miles this morning and it worked like a charm- no rattles from the exhaust, just the dashboard lol. Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
Antigini-GT/CS
2005-2009 Mustang
5
10/5/15 09:43 AM