I have SLPs LM and the O/R H...and around 2400-2600 the raspy trumpeting makes driving really embarrasing and annoying. SO i heard these resanators will help

UMMMM so i hear you weld them before the axle? Not the way alternative auto had them welded?

Some pics would help...and some advice thanx guyz!

 

basiclly you are welding a muffler before the axle like the older mustangs have it setup (Dynomax Bullet is what i mean) i had a V6 with DM Bullets and dang loud but not raspy and poppy

 

Keep us posted on how it works out for you. Also take pics of where you installed them. I also want the off road h-pipe but dont want to get rid of my loudmouth so if these work I'll be getting them.

 

I've also read that you can stagger their side-by-side placement by a few inches, which helps break up the harmonics even more.

 

I thought the resonator went on after the mufflers. I assume they work the same either way??
can you post a link to the ones you bought please.

 

If you did it that way, they'd stick out of the back of the car about 2 feet.

 

 

hmmmm so where exaclt would be the best place to weld them???

 

pretty funny I know that. I should have said I thought thats where they were desinged to go, and are they as effective if you put them before the mufflers. I know there's not much of a choice here. I think I would change out the crappy sounding mufflers before adding resonators.

 

where ever they will fit with out losing to much ground clearence and at least 1.5 inches away from your floor board unless your going to add a heat shield in there some where

 

If I was going to add them, I'd put them between the H crossover and the axle. That seems to be the longest "straight" run under there.

 

hmmm pics maybe? I heard before the axle....

 

Same thing... after the H (or X) and before the axle.

 

so how did alternative auto have it welded?

 

heres a pic of how alternative auto welded theirs....

http://www.alternativeauto.com/image...exhaust-02.jpg

 

okay when are we gonne HEAR these things

 

Looks like LTs and a custom H pipe.

 

ic....hmmmm, so for a final saying in these....i will be weldeing them BEFORE THE AXLE..correct?

 

yes before the axle... if i had one chance to put them on, I would put them as close to after the h or x or whatever as possible.... that's my gut feeling

 

i have the o/r H