Hooker SuperComp Headers
11/30/05, 10:31 PM
#62
Originally posted by Cleveland@November 30, 2005, 9:23 PM
you obviously havent read through much of this thread, have you?
-Dan
you obviously havent read through much of this thread, have you?
-Dan
12/31/05, 09:26 AM
#65
Guest
Posts: n/a
Why do you have to turn off your rear o2 sensors. I just installed the hookers and no check engine light / seems to be running fine.
p.s got mine from barnett performance in ATL for $538.
Sounds sweet with the factory pipe cut to fit and flowmasters.
p.s got mine from barnett performance in ATL for $538.
Sounds sweet with the factory pipe cut to fit and flowmasters.
1/1/06, 05:36 PM
#66
Bullitt Member
Join Date: October 31, 2005
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Cleveland@November 24, 2005, 7:16 PM
Ok, someone asked for the pics of the turn downs that do the trick. Mind you Im still using the first pipe of the SLP Loudmouths so I could utilize the hangers. I just replaced SLP's resonator tips with the $5 turn downs.
[img]http://snt-systems.com/temp/
-Dan
Ok, someone asked for the pics of the turn downs that do the trick. Mind you Im still using the first pipe of the SLP Loudmouths so I could utilize the hangers. I just replaced SLP's resonator tips with the $5 turn downs.
[img]http://snt-systems.com/temp/
-Dan
1/1/06, 07:51 PM
#67
Cobra Member
Thread Starter
Join Date: February 20, 2005
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
they have had their good share of burnouts but there is quite a bit of thread for normal driving.
Mac07cobra, did you have any retune done when puting on your longtubes?
From the first minute of cranking the engine over with the pipes installed I got a CEL, a retune is almost always required for most engine modifications.
Also take note that I only had 2 of the 4 O2 sensors installed, the reason for the CEL. I opted for turning them off so I didnt have to buy extensions.
-Dan
Mac07cobra, did you have any retune done when puting on your longtubes?
From the first minute of cranking the engine over with the pipes installed I got a CEL, a retune is almost always required for most engine modifications.
Also take note that I only had 2 of the 4 O2 sensors installed, the reason for the CEL. I opted for turning them off so I didnt have to buy extensions.
-Dan
1/2/06, 06:17 AM
#68
Team Mustang Source
Dan - just watched the video, and have a few comments:
1. God bless good ole American horsepower!
2. 2 words instantly came to mind when you floored it: Pro Stock! That's what it reminded me of - the sound of a Pro Stock NHRA car for just a brief second.
Awesome to say the least.
I read the whole thread, but didn't see where you mentioned anything about gains. How was the SOTP feel afterwards, and have you had it on a dyno since the Hookers were installed?
Thanks!
1. God bless good ole American horsepower!
2. 2 words instantly came to mind when you floored it: Pro Stock! That's what it reminded me of - the sound of a Pro Stock NHRA car for just a brief second.
Awesome to say the least.
I read the whole thread, but didn't see where you mentioned anything about gains. How was the SOTP feel afterwards, and have you had it on a dyno since the Hookers were installed?
Thanks!
3/5/07, 05:49 PM
#71
Cobra Member
Thread Starter
Join Date: February 20, 2005
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
wow, I totally missed the responses...
I couldnt say one way or the other if going to straight pipes (turn downs) did anything at all for performance. SOTP is the same. I only was interested in getting that really hardcore Pro sound. I'd be cool to do cams just to enhance it.
Once I get my new Lincoln the Mustang is being limited in daily driver service and Im putting the turn downs back on. They help me keep my foot out of the pedal and my speed down. The bad *** effect is awesome of course.
Oh, the Hookers are aluminum I believe. Its been a while and I have forgotten.
-Dan
I couldnt say one way or the other if going to straight pipes (turn downs) did anything at all for performance. SOTP is the same. I only was interested in getting that really hardcore Pro sound. I'd be cool to do cams just to enhance it.
Once I get my new Lincoln the Mustang is being limited in daily driver service and Im putting the turn downs back on. They help me keep my foot out of the pedal and my speed down. The bad *** effect is awesome of course.
Oh, the Hookers are aluminum I believe. Its been a while and I have forgotten.
-Dan
Thread
Thread Starter
Forum
Replies
Last Post
Antigini-GT/CS
2005-2009 Mustang
5
10/5/15 09:43 AM