Dynatech Longtube Headers Installed
#81
Thread Starter
Originally posted by 300HPGT@January 11, 2006, 3:53 PM
it gets that crop duster sound at about 2700 rpms - 4500. My car sounds like that too but I think that is the resonance of these 2.5" pipes on these cars. I wonder what full 3" from the H-pipe back would sound like Don. It might change the tone of the exhaust. That is just another suggestion if you cant get rid of the "Trombone" sound. Trumpets are higher is sound so its more of a Trombone or Tuba sound. Just my 0.02$.
it gets that crop duster sound at about 2700 rpms - 4500. My car sounds like that too but I think that is the resonance of these 2.5" pipes on these cars. I wonder what full 3" from the H-pipe back would sound like Don. It might change the tone of the exhaust. That is just another suggestion if you cant get rid of the "Trombone" sound. Trumpets are higher is sound so its more of a Trombone or Tuba sound. Just my 0.02$.
#83
Thread Starter
Originally posted by 300HPGT@January 11, 2006, 4:16 PM
Yeah try those mufflers they should sound good. I want long tubes! I had them on my old mustang and I loved the performance difference. So would you recomend the Dynatech's??
Yeah try those mufflers they should sound good. I want long tubes! I had them on my old mustang and I loved the performance difference. So would you recomend the Dynatech's??
#84
Originally posted by don_w@January 10, 2006, 9:54 AM
I have a set of "pre-owned" Magnaflows being shipped to me right now. I'll try them out and see how it sounds then.
I have a set of "pre-owned" Magnaflows being shipped to me right now. I'll try them out and see how it sounds then.
#85
Thread Starter
They are scheduled to arrive on Monday.
#86
Thread Starter
Here is an update on my "unacceptable" exhaust sound.
Tonight I slapped on a pair of Magnaflows in lieu of my Loudmouths. I have mixed emotions on the swap. On the positive side, they did take care of that annoying trumpeting and the "bap-bap-bap-bap-bap" is gone, so mission accomplished. I couldn't deal with that much longer. On the negative side, the car is sooooo quiet now, especially at idle and low rpms. It sounds OK at WOT. I'm sure it's louder than stock, but after running with LMs for several months and then getting to hear it with open headers... this is a dramatic change for me.
So for now, I'm going leave it with the Magnaflows until after the Kenne Bell gets installed. After that, I may watch for some other "pre-owned" axlebacks to test out.
Bottom line: I'm glad the mid-range trumpets are gone, but I miss the volume.
Tonight I slapped on a pair of Magnaflows in lieu of my Loudmouths. I have mixed emotions on the swap. On the positive side, they did take care of that annoying trumpeting and the "bap-bap-bap-bap-bap" is gone, so mission accomplished. I couldn't deal with that much longer. On the negative side, the car is sooooo quiet now, especially at idle and low rpms. It sounds OK at WOT. I'm sure it's louder than stock, but after running with LMs for several months and then getting to hear it with open headers... this is a dramatic change for me.
So for now, I'm going leave it with the Magnaflows until after the Kenne Bell gets installed. After that, I may watch for some other "pre-owned" axlebacks to test out.
Bottom line: I'm glad the mid-range trumpets are gone, but I miss the volume.
#88
Thread Starter
Exactly... but I'm not sure what I should try next. Something similar in design to the Magnaflows, but louder.
#89
Originally posted by don_w@January 17, 2006, 10:30 PM
Exactly... but I'm not sure what I should try next. Something similar in design to the Magnaflows, but louder.
Exactly... but I'm not sure what I should try next. Something similar in design to the Magnaflows, but louder.
duh.....borlas.... lol
I wish someone would post a clip of lt's, h pipe, and borlas. i am dying to hear that combo, as it is what I will be running somewhat soon
#90
Thread Starter
Which Borlas? The straight-through design ones I've seen will probably trumpet like the LMs do. Does Borla make a fiber packed muffler?
#92
Thread Starter
Originally posted by SixtySix@January 17, 2006, 7:30 PM
In fact they do.
The Ford Racing ones with an "A" at the end of the part number are a chambered muffler.
In fact they do.
The Ford Racing ones with an "A" at the end of the part number are a chambered muffler.
Maybe someone out there has a set they are looking to sell? Or even trade for a set of Loudmouths?
#94
Tony, when are your headers expected back from getting coated? Once you get them installed, I am going to find a way to sneak out of work the next time you guys go to the track. I really want to go with a set of long tubes, but do any of the companies that are selling them right now offer a H pipe setup rather than the X? Originally I was planning on going with the Dynatech's but the tubes seem to big for a street car that will not see a blower. I am planning on going the N/A route with ported heads and cams. Don you said that the low end torque came back when the cats were reinstalled?
#95
Jon, they're getting back from coating either tomorrow, or Thursday. If you are looking for a bolt-on H with cats, then JBA has your setup
I just don't like the price... but oh well
I just don't like the price... but oh well
#96
Thread Starter
Originally posted by jvm051@January 17, 2006, 8:29 PM
Don you said that the low end torque came back when the cats were reinstalled?
Don you said that the low end torque came back when the cats were reinstalled?
#97
Originally posted by atomic_il@January 17, 2006, 8:37 PM
duh.....borlas.... lol
I wish someone would post a clip of lt's, h pipe, and borlas. i am dying to hear that combo, as it is what I will be running somewhat soon
duh.....borlas.... lol
I wish someone would post a clip of lt's, h pipe, and borlas. i am dying to hear that combo, as it is what I will be running somewhat soon
#99
#100
Legacy TMS Member
Originally posted by don_w@January 17, 2006, 9:30 PM
Exactly... but I'm not sure what I should try next. Something similar in design to the Magnaflows, but louder.
Exactly... but I'm not sure what I should try next. Something similar in design to the Magnaflows, but louder.
Don't forget about Bassani too. They're pretty close to the same design as the Magnaflow but louder.
Yeah sure, I'm alittle partial.........but that's why I bought them over the Magnaflow. They're deep too, even with an off-road H.
ts