Blown 05 Dyno numbers 454 RWHP
Thread Starter
Member
Joined: September 19, 2005
Posts: 27
Likes: 0
Originally posted by 2005RedGT@January 6, 2006, 6:56 AM
hey royb, what kind of dyno was it? a Mustang Dyno ?
-Bryan
hey royb, what kind of dyno was it? a Mustang Dyno ?
-Bryan
Thread Starter
Member
Joined: September 19, 2005
Posts: 27
Likes: 0
Originally posted by Fastback65@January 6, 2006, 12:35 AM
I would say that the guy either did not know hot to drive his Viper or was'nt really giving it all he had..... and from a strart line... no way.
Stats on the Viper by the way
Engine - 505 c.i.
HP - 500
Tourque - 525
Weight - 3410
Top speed - 190
0-60 mph - 4.0
(thats what most magazines have it at, there may be some variance)
They have us dominated in every category.
Don't get me wrong though, you have a sweet set up that I envy.
I would say that the guy either did not know hot to drive his Viper or was'nt really giving it all he had..... and from a strart line... no way.
Stats on the Viper by the way
Engine - 505 c.i.
HP - 500
Tourque - 525
Weight - 3410
Top speed - 190
0-60 mph - 4.0
(thats what most magazines have it at, there may be some variance)
They have us dominated in every category.
Don't get me wrong though, you have a sweet set up that I envy.
I think from a standing start the viper will jump me bu I would run him down and pass. I'm setting up a race vrs a C6 vette then aftger that I'll a Viper & post the videos.
Thread Starter
Member
Joined: September 19, 2005
Posts: 27
Likes: 0
Originally posted by official_style@January 6, 2006, 7:31 AM
....now if i run it with the stock pulley, i should have no durability/reliability issues correct? ....
....now if i run it with the stock pulley, i should have no durability/reliability issues correct? ....
Cobra Member
Joined: March 30, 2005
Posts: 1,122
Likes: 0
Originally posted by Burke0011@January 5, 2006, 8:30 PM
I hate you..... I had just basically convinced myself that I do NOT have the money for a blower (Saleen was top of the list) and won't till at least halfway through 2007...........
And now the VIRUS is planted again.......
AAARRRGHRGHHH!!!! :bang:
Nice numbers and way to go man - and I love how it still looks stock. Is the blower fairly quiet?
I hate you..... I had just basically convinced myself that I do NOT have the money for a blower (Saleen was top of the list) and won't till at least halfway through 2007...........
And now the VIRUS is planted again.......
AAARRRGHRGHHH!!!! :bang:
Nice numbers and way to go man - and I love how it still looks stock. Is the blower fairly quiet?
You took the words right out of my keyboard.
Mach 1 Member
Joined: June 17, 2005
Posts: 900
Likes: 0
How about injectors? Does the kit come with them or do I need them? And the fuel pump? I am not gonna go crazy with the tune, a nice safe reliable one. I also will prob only take it to the track a few times, and will not run slicks. mostly street driven.
Big Falken Tires
Joined: October 17, 2004
Posts: 4,601
Likes: 1
Originally posted by hawgman@January 6, 2006, 9:09 AM
You took the words right out of my keyboard.
You took the words right out of my keyboard.
PAINFUL - ain't it Doc??....
Bullitt Member
Joined: May 25, 2005
Posts: 300
Likes: 0
Good Lord! Too bad they didnt start the run at 2500 RPM's to show how wide the torque curve is. over 400 LBFT of torque from 2500-6000 rpms. The pull of that motor must be amazing. How much did the whole install/parts cost for what you have now?
Thread Starter
Member
Joined: September 19, 2005
Posts: 27
Likes: 0
Originally posted by 300HPGT@January 6, 2006, 12:17 PM
Good Lord! Too bad they didnt start the run at 2500 RPM's to show how wide the torque curve is. over 400 LBFT of torque from 2500-6000 rpms. The pull of that motor must be amazing. How much did the whole install/parts cost for what you have now?
Good Lord! Too bad they didnt start the run at 2500 RPM's to show how wide the torque curve is. over 400 LBFT of torque from 2500-6000 rpms. The pull of that motor must be amazing. How much did the whole install/parts cost for what you have now?
install was free since I did it myself.
parts total up to a little less than 6k for everything in my sig. & I bought the car on 11/2004 with the X plan price so I got about 35k for everything.
Thread Starter
Member
Joined: September 19, 2005
Posts: 27
Likes: 0
Street Supercharging (New revised edition) by Pat Ganahl
5.0L Ford Dyno test by Richard Holdener
Ford Fuel Injection by Ben watson
all good current books to have .
Bullitt Member
Joined: October 6, 2005
Posts: 220
Likes: 1
You're lucky man, I posted about my 451 rwhp dyno pull on my ProCharged 05 GT and every other response was "grenade! grenade!"
Ever since Bryan blew his motor in his red 05 I've been scared of standing on it. I've only really raced it once and it wasn't an *ahem* unsanctioned race. It's my daily driver so that factors in too...
Is the stock block/bottom end in my car up to 425-450 rwhp? I hate having all that power and being afraid of using it...
Kris
Ever since Bryan blew his motor in his red 05 I've been scared of standing on it. I've only really raced it once and it wasn't an *ahem* unsanctioned race. It's my daily driver so that factors in too...
Is the stock block/bottom end in my car up to 425-450 rwhp? I hate having all that power and being afraid of using it...
Kris
[img]style_emoticons/<#EMO_DIR#>/drool.gif[/img]
I want one.
I want one.
Mach 1 Member
Joined: June 24, 2004
Posts: 985
Likes: 0
To the original poster...I would think that you could have gotten those numbers without doing intake or exhaust. What do you think?
BTW, nice setup. I'll probably go KB myself, but either way it's a great setup.
BTW, nice setup. I'll probably go KB myself, but either way it's a great setup.
Mach 1 Member
Joined: August 16, 2005
Posts: 675
Likes: 2
<div class='quotetop'>QUOTE(srichard @ February 9, 2006, 11:58 AM) Quoted post</div><div class='quotemain'>
Hey Doc,
Are you using a C&L inlet tube with your Saleen SC. Can you post some pics. I was wonder if this combo would work.
-Scott
[/b][/quote]
Saleen SC set up works with the stock air box and tube --- the kit normally comes with the injectors too --- seen a few of them -- boost can be low at only 4.5 lbs ----- especially for a daily streeted car --- have heard the Saleen blower -- it is real quiet compared to some ----
great numbers [img]style_emoticons/<#EMO_DIR#>/thumb.gif[/img] --- my local Ford shop has run a few RoushChargers on F150s and 05/06 Mustangs w/o incidents and running close to 500 bhp and stock blocks and internals ----
Hey Doc,
Are you using a C&L inlet tube with your Saleen SC. Can you post some pics. I was wonder if this combo would work.
-Scott
[/b][/quote]
Saleen SC set up works with the stock air box and tube --- the kit normally comes with the injectors too --- seen a few of them -- boost can be low at only 4.5 lbs ----- especially for a daily streeted car --- have heard the Saleen blower -- it is real quiet compared to some ----
great numbers [img]style_emoticons/<#EMO_DIR#>/thumb.gif[/img] --- my local Ford shop has run a few RoushChargers on F150s and 05/06 Mustangs w/o incidents and running close to 500 bhp and stock blocks and internals ----
Thread
Thread Starter
Forum
Replies
Last Post
PonyMuscletang13
2010-2014 Mustang
4
Sep 29, 2015 09:40 AM
