BBR cams installed, dynoed, and videos. FINALLY!!
#21
Originally Posted by inVERTed
ej....
what was the cost for parts?
labor?
tune time?
thanks----i am interested, but if its 4-5K, i'd rather S/C
what was the cost for parts?
labor?
tune time?
thanks----i am interested, but if its 4-5K, i'd rather S/C
These are all ballpark figures on the high end of the spectrum. I would be suprised if someone pays more than 3K for everything needed including tuning.
#22
Mach 1 Member
Thread Starter
Join Date: February 14, 2005
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
yeah, S197GT is right on.... well under $1000 in labor for the install. it is about 8 hours or so if you have the right tools to do the springs without pulling the heads. the tuning takes a LOT of time.... I am talking hours and hours on the dyno. I got a deal on the tuning because they learned how to tune VVT on my car. but these are no replacement for a blower.... they are actually blower cams... designed to compliment a blower.
#23
Mach 1 Member
Rock on , sounds great man! My favorite part is the end of the 2nd video...
Glub, glub, glub, glub, glub...
"asoid#4gh&w!et" (unintelligible words...)
Glub, glub, glub, glub, glub...
"What?"
Glub, glub, glub, glub, glub...
"eury#7%tjko!h&" (more unintelligible words...)
Glub, glub, glub, glub, glub...
"Just shut it off..."
Glub, glub, glub, glub, glub...
"asoid#4gh&w!et" (unintelligible words...)
Glub, glub, glub, glub, glub...
"What?"
Glub, glub, glub, glub, glub...
"eury#7%tjko!h&" (more unintelligible words...)
Glub, glub, glub, glub, glub...
"Just shut it off..."
#24
The video was awesome. Green onions was the first song I heard on the radio of my stang when i got it, and i was sure i had died and gone to heaven. I thought I had gotten the cams off my mind after not being impressed with the idle, or power gains from the comp cams, and BBR had red marks in my book from the railing they got on the forums. I talked to chris from BBR on the phone yesterday, and I am now reconsidering the cam idea as I am after the lumpy idle also, as well as some power gains. I am all about going with companies that treat their customers right!
#25
The video was awesome. Green onions was the first song I heard on the radio of my stang when i got it, and i was sure i had died and gone to heaven. I thought I had gotten the cams off my mind after not being impressed with the idle, or power gains from the comp cams, and BBR had red marks in my book from the railing they got on the forums. I talked to chris from BBR on the phone yesterday, and I am now reconsidering the cam idea as I am after the lumpy idle also, as well as some power gains. I am all about going with companies that treat their customers right!
#26
yeah, S197GT is right on.... well under $1000 in labor for the install. it is about 8 hours or so if you have the right tools to do the springs without pulling the heads. the tuning takes a LOT of time.... I am talking hours and hours on the dyno. I got a deal on the tuning because they learned how to tune VVT on my car. but these are no replacement for a blower.... they are actually blower cams... designed to compliment a blower.
John
#27
#28
Holy interweb problems Batman!
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information
Thread
Thread Starter
Forum
Replies
Last Post