Best way to clean engine bay???
By staying on top of it once a week.
when i had my 03 v6, in october and april I'd use Greased Lightening degreaser (very good stuff) - a spray foam on a cold engine. let it sit for 15 mins and come back and carefully hose down your engine (keep away from fuse box and fans) and it came out really well......
first there is at least one thread on this in the detailing section of these forums
2nd real quick:
-wrap up/tape up any and all electrical /air parts that you do not want to get wet; fuse box, altenator, airbox, etc.
-saturate the engine with Meguiars Safe Degreaser (properly diluted)
-agitate any "problem" areas with a brush
-let sit for 5 minutes or so
-rinse with water hose
-remove wrap/tape
-saturate the entire engine bay (metal, plastic), minus the painted sidewalls, with Meguiars Hyper Dressing (properly diluted)
-close hood, your done.
2nd real quick:
-wrap up/tape up any and all electrical /air parts that you do not want to get wet; fuse box, altenator, airbox, etc.
-saturate the engine with Meguiars Safe Degreaser (properly diluted)
-agitate any "problem" areas with a brush
-let sit for 5 minutes or so
-rinse with water hose
-remove wrap/tape
-saturate the entire engine bay (metal, plastic), minus the painted sidewalls, with Meguiars Hyper Dressing (properly diluted)
-close hood, your done.
What would you say is the best dilution for Safe Degreaser and Hyper Dressing?
first there is at least one thread on this in the detailing section of these forums
2nd real quick:
-wrap up/tape up any and all electrical /air parts that you do not want to get wet; fuse box, altenator, airbox, etc.
-saturate the engine with Meguiars Safe Degreaser (properly diluted)
-agitate any "problem" areas with a brush
-let sit for 5 minutes or so
-rinse with water hose
-remove wrap/tape
-saturate the entire engine bay (metal, plastic), minus the painted sidewalls, with Meguiars Hyper Dressing (properly diluted)
-close hood, your done.
2nd real quick:
-wrap up/tape up any and all electrical /air parts that you do not want to get wet; fuse box, altenator, airbox, etc.
-saturate the engine with Meguiars Safe Degreaser (properly diluted)
-agitate any "problem" areas with a brush
-let sit for 5 minutes or so
-rinse with water hose
-remove wrap/tape
-saturate the entire engine bay (metal, plastic), minus the painted sidewalls, with Meguiars Hyper Dressing (properly diluted)
-close hood, your done.
NTTAWWT





Joined: January 27, 2007
Posts: 14,456
Likes: 35
From: That town you drive through to get to Myrtle Beach
I use Armor All on the plastics, a tire shine on the hoses, and a damp cloth to clean up everything else. It's not perfect, but it's got 120k on the odometer, and its my daily driver; so for that, it looks great.
Thread
Thread Starter
Forum
Replies
Last Post



