Ponies on The Run (Again)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
FYI to the POTR fellas, I'll be selling off a couple mods when the SC goes in.![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
- C&L Racer: Bought new last June, maybe 800 miles on it.
- Steeda UDP's: same as C&L
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Bill - I want to get it asap... But I have been busy with work
soon as I get the time I will swing by.
I'm hoping for tomorrow. Thanks again for letting me
borrow it. Really like the look and feel. Just want to compare it to the satin ****. After that, on to ordering the mgw short shifter AND some stingers
anyone know where I can get the best deal?
Jed - cannot call my car quite anymore
Jon and Bill - glad to hear the twins
are due march 1st
the SOS guage pillar looks
![Nonono](https://themustangsource.com/forums/images/smilies/nonono.gif)
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
borrow it. Really like the look and feel. Just want to compare it to the satin ****. After that, on to ordering the mgw short shifter AND some stingers
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Jed - cannot call my car quite anymore
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
Jon and Bill - glad to hear the twins
are due march 1st
![Biggrinjester](https://themustangsource.com/forums/images/smilies/biggrinjester.gif)
![Headbang](https://themustangsource.com/forums/images/smilies/headbang.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! Yep... just about 3 months! Sound about right, Bill??
You can see the difference in what you can see of the fins... now you can't see that as easily any more:
Attachment 39618
You can see the difference in what you can see of the fins... now you can't see that as easily any more:
Attachment 39618
![Screwy](https://themustangsource.com/forums/images/smilies/screwy.gif)
Your going to need a SCT/Tune from Doug or Brent to go with it.
![Stickpoke](https://themustangsource.com/forums/images/smilies/stickpoke.gif)
Looks like the PJ's getting modded slowly but surely.
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Bill - I want to get it asap... But I have been busy with work
soon as I get the time I will swing by.
I'm hoping for tomorrow. Thanks again for letting me
borrow it. Really like the look and feel. Just want to compare it to the satin ****. After that, on to ordering the mgw short shifter AND some stingers
anyone know where I can get the best deal?
Jed - cannot call my car quite anymore
![Nonono](https://themustangsource.com/forums/images/smilies/nonono.gif)
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
borrow it. Really like the look and feel. Just want to compare it to the satin ****. After that, on to ordering the mgw short shifter AND some stingers
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Jed - cannot call my car quite anymore
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
Kevin was the reason I got my O/R H he kept calling my car a kitten.
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Great guys! Looks like they may never make it to the 'For Sale' thread. ![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
No problem Luis. At worst, I can give it to you on Saturday.
Like Leo mentioned, MGW is pretty set on pricing, just have to decide which threads you want, SAE or Metric, or the all-in-one Classic ****.
On the Stingers, it's a hit and miss in the For Sale thread. New, expect over 4 bills for them. FWIW, I got mine from Downs Ford.
That's right! Good reminder Leo.
Add another $400 to the C&L George. Brenspeed - BamaChips
Leo's kitten is all grown up now.
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Like Leo mentioned, MGW is pretty set on pricing, just have to decide which threads you want, SAE or Metric, or the all-in-one Classic ****.
On the Stingers, it's a hit and miss in the For Sale thread. New, expect over 4 bills for them. FWIW, I got mine from Downs Ford.
That's right! Good reminder Leo.
Add another $400 to the C&L George. Brenspeed - BamaChips
Leo's kitten is all grown up now.
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
![Stickpoke](https://themustangsource.com/forums/images/smilies/stickpoke.gif)
http://forums.bradbarnett.net/showth...36#post1108336
GTR Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: January 26, 2006
Location: Central Florida
Posts: 4,639
Likes: 0
Received 0 Likes
on
0 Posts
O/R H for sale. (If I remember correctly Brian has one for sale too.)![Stickpoke](https://themustangsource.com/forums/images/smilies/stickpoke.gif)
http://forums.bradbarnett.net/showth...36#post1108336
![Stickpoke](https://themustangsource.com/forums/images/smilies/stickpoke.gif)
http://forums.bradbarnett.net/showth...36#post1108336
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Brian's has been all over the country...
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
That tool that sheared his intake manifold bolt from the other Forum just replied...
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
):
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Tom's just whimpy.
![Biggrinjester](https://themustangsource.com/forums/images/smilies/biggrinjester.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
That tool that sheared his intake manifold bolt from the other Forum just replied...
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
):
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
Bill's laying the smack down
![Headbang](https://themustangsource.com/forums/images/smilies/headbang.gif)
Legacy TMS Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
That tool that sheared his intake manifold bolt from the other Forum just replied...
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
):
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
![Biggrinjester](https://themustangsource.com/forums/images/smilies/biggrinjester.gif)
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 17, 2007
Location: Texa$
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
That tool that sheared his intake manifold bolt from the other Forum just replied...
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
):
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
Good thing you didn't supply the link to the other forum or I might have let him know what a D!ck he was
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
![Banghead](https://themustangsource.com/forums/images/smilies/banghead.gif)
![Banana](https://themustangsource.com/forums/images/smilies/banana.gif)
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 17, 2007
Location: Texa$
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
Cobra R Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: January 15, 2007
Location: Hampton Roads, VA
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
That tool that sheared his intake manifold bolt from the other Forum just replied...
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
):
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
ok, well you should mention that its 18 ft pounds bc thats more common of a tool and for car noobies like me tryin to do this we broke that bolt, not ur fault but its ours, but u should still add it so no one else makes the mistake i did.
My response (I've lost my patience
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Dude, with all due respect, no one else snapped these bolts from my instructions because they all knew the difference between lbs-in and lbs-ft. This is exactly how the Service Manual calls out the torque. Besides, even if you didn't know how to read the inch/pound abbreviation, common sense would tell you that 89 foot pounds is waaaay too much for those small bolts; to put it into perspective, our aluminum wheel lug nuts get torqued to 90 foot pounds.. see the difference?
FWIW, you're still incorrect in calculating that the intake manifold bolts get torqued to 18 lbs-ft, that equates to 216 lbs-in.. probably would snap the bolt again. To calculate the correct torque of 89 lbs-in into foot pounds, you have to divide that value by 12 which would be 7.4 lbs-ft.
TB
.....but only by 1 person
![Biggrinjester](https://themustangsource.com/forums/images/smilies/biggrinjester.gif)
Next time, Bill, put it in Newton meters
![Rollinglaugh](https://themustangsource.com/forums/images/smilies/rollinglaugh.gif)
GTR Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: January 26, 2006
Location: Central Florida
Posts: 4,639
Likes: 0
Received 0 Likes
on
0 Posts
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
![Doh](https://themustangsource.com/forums/images/smilies/doh.gif)
does Brian have? Should I for my
daily driver?