Ponies on The Run (Again)
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Bill. Not worried about the 60ft times just yet since the best I've gotten was 2.0. I doubt the LCA's and Relo brackets will help me drop 3 tenths.
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
I lied about my RWHP it's actually....
432.83 RWHP
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I'll asked TacoBill if he has a local contact for a front end alignment guy. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY.This Saturday I'll bring it up to cafe show status.
Below is the final dyno run:
Questions?
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I'll asked TacoBill if he has a local contact for a front end alignment guy. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY.This Saturday I'll bring it up to cafe show status.
Below is the final dyno run:
Questions?
Legacy TMS Member
432.83 RWHP
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I asked TacoBill if he has a local contact for a front end alignment. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY. By Saturday it should be back to cafe show status.
Below is the final dyno run:
Questions?
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I asked TacoBill if he has a local contact for a front end alignment. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY. By Saturday it should be back to cafe show status.
Below is the final dyno run:
Questions?
Team Mustang Source
432.83 RWHP
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I asked TacoBill if he has a local contact for a front end alignment. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY. By Saturday it should be back to cafe show status.
Below is the final dyno run:
Questions?
379.64 Torque
All I have to say is that the KB lives up to it's reputation. Loads of reserve power. When Ricardo took me for a test ride it felt like a Magic Mountain ride! It actually made me dizzy if you can imagine that! Low end torque massive. The car sounds a little diffrent maybe due to the JBA shorties and the Bassani X pipe. The handles great a little hyper at 80+ mph. I think that might be due to a needed alignment. I asked TacoBill if he has a local contact for a front end alignment. A few things need to be tended to but nothing major. One thing for sure I need to clean the car its DIRTY. By Saturday it should be back to cafe show status.
Below is the final dyno run:
Questions?
Wish I could be at the cafe.
Legacy TMS Member
WTF is this...
http://forums.bradbarnett.net/showpo...&postcount=351
http://forums.bradbarnett.net/showpo...&postcount=352
I guess I expected a little more class from you guys.
http://forums.bradbarnett.net/showpo...&postcount=351
http://forums.bradbarnett.net/showpo...&postcount=352
I guess I expected a little more class from you guys.
Sorry about the late posts... Just got back from Dallas yesterday and the last couple have been hectic.
Yup, do it to you everytime! I had dinner there before... Might have been the trip when I stopped by. The food was ok, but the beer was .
$270!
Yup, They're from Jersey... The f-word was used quite liberally.
Awesome numbers Jed!
Yeah... Since I can't afford a blower can I use your car as a getway vehicle when I rob the banks so I can get mine!.
I didn't get any pictures but I passed an 18 wheeler on the way home yesterday and I swear to you it had spinners on it! And no I wasn't drinking or doing drugs! So I call my wife to tell her about it and she tells me that a customer of our son just bought a GT500. On the day he picks it up he goes out and has a new blower put on it!
Then she says "maybe I can get Sonny to get it for Dubh". I had to tell that it would cost around $2000 to put that on even if I did it myself. Still way cheaper than buying a kit. But I still can't afford it.
Yup, do it to you everytime! I had dinner there before... Might have been the trip when I stopped by. The food was ok, but the beer was .
$270!
Awesome numbers Jed!
Yeah... Since I can't afford a blower can I use your car as a getway vehicle when I rob the banks so I can get mine!.
I didn't get any pictures but I passed an 18 wheeler on the way home yesterday and I swear to you it had spinners on it! And no I wasn't drinking or doing drugs! So I call my wife to tell her about it and she tells me that a customer of our son just bought a GT500. On the day he picks it up he goes out and has a new blower put on it!
Then she says "maybe I can get Sonny to get it for Dubh". I had to tell that it would cost around $2000 to put that on even if I did it myself. Still way cheaper than buying a kit. But I still can't afford it.
Okay, does anyone recall Jed talking about a Bassani X?
Jed always manages to surprise us. He always bring new mods constantly to the table!
Time for another photoshoot.
Sorry Ray. Contrary to what my friends say, I do have Class.
You see?... Attachment 34266 Attachment 34267
Team Mustang Source
WTF is this...
http://forums.bradbarnett.net/showpo...&postcount=351
http://forums.bradbarnett.net/showpo...&postcount=352
I guess I expected a little more class from you guys.
http://forums.bradbarnett.net/showpo...&postcount=351
http://forums.bradbarnett.net/showpo...&postcount=352
I guess I expected a little more class from you guys.
I met the prez and another member at the John Force Show in July(?)... They seemed like really cool people. I'd probably gravitate to it if it was a little closer.
Team Mustang Source
Okay, does anyone recall Jed talking about a Bassani X?
Jed always manages to surprise us. He always bring new mods constantly to the table!
Time for another photoshoot.
Sorry Ray. Contrary to what my friends say, I do have Class.
You see?... Attachment 34266 Attachment 34267
That was PG.
A PG-rated motion picture should be investigated by parents before they let their younger children attend. The PG rating indicates, in the view of the Rating Board, that parents may consider some material unsuitable for their children, and parents should make that decision.
The more mature themes in some PG-rated motion pictures may call for parental guidance. There may be some profanity and some depictions of violence or brief nudity. But these elements are not deemed so intense as to require that parents be strongly cautioned beyond the suggestion of parental guidance. There is no drug use content in a PG-rated motion picture.
A PG-rated motion picture should be investigated by parents before they let their younger children attend. The PG rating indicates, in the view of the Rating Board, that parents may consider some material unsuitable for their children, and parents should make that decision.
The more mature themes in some PG-rated motion pictures may call for parental guidance. There may be some profanity and some depictions of violence or brief nudity. But these elements are not deemed so intense as to require that parents be strongly cautioned beyond the suggestion of parental guidance. There is no drug use content in a PG-rated motion picture.
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Okay, does anyone recall Jed talking about a Bassani X?
Jed always manages to surprise us. He always bring new mods constantly to the table!
Time for another photoshoot.
Sorry Ray. Contrary to what my friends say, I do have Class.
You see?... Attachment 34266 Attachment 34267
Keep spanking those chickens! You die'un... I'll fry'un!
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Awesome deal for someone that lives in Socal!!
GMS is selling A-arm braces for $15. The catch is shipping is $15. The good thing is they'll ship two of them to the same addy for that price. So $21.50 you can get yourself an A-arm support that normally goes for $60 plus shipping. I know I know it's a GMS part but come on it's only a bar I doubt BMR or CHE's is any better. So with that said who wants to jump in on this deal with me?
FYI-For you non-socal people this deal is nation wide it's just I'm looking for someone local to help absorb the riduculous shipping cost.
Bill,Bill2,Ray,Brian,Jorge. Let me know asap so I can call in the order.
BTW-after talking with BMR decided the LCA's were a waste of money since I don't have any wheel hop to speak of. Although I will still be installing the BMR relocation brackets to correct the angle of the stock lca's.
FYI-For you non-socal people this deal is nation wide it's just I'm looking for someone local to help absorb the riduculous shipping cost.
Bill,Bill2,Ray,Brian,Jorge. Let me know asap so I can call in the order.
BTW-after talking with BMR decided the LCA's were a waste of money since I don't have any wheel hop to speak of. Although I will still be installing the BMR relocation brackets to correct the angle of the stock lca's.
They sure taste good I had a 9 piece original last week!
By yourself?
There goes 2 more birds off the face of this Earth.
The Bassani surprise snuck in at last minute from my first dyno numbers @424 RWHP. I wanted to get it to 450 by unlocking HP buy using a better pipe. I could have thrown on a smaller pulley but achieving the HP gain from the SC to 450 would be more stressful to the motor. See my logic?
I do.
That same logic is driving the carbon fiber driveshsaft, I'm getting closer to 450! I think I might gain +10 to 15 HP with the new driveshaft.
More like 'recovering'. Flywheel HP will be the same, but more of that HP will be transferred to the rear wheels.
Another free HP is the Meziere electric H2O pump, good for 11 RWHP!
... I don't know yet because they are developing it will be ready in 30-60 days.
Sure you can wait that long?
Why not just go with BMR's 1-pc carbon fiber? link
FYI.. anticipate clearance issues if you end up getting a front driveshaft loop to your MGW shifter.
Keep spanking those chickens! You die'un... I'll fry'un!
Fried Chicken? Sounds like JCC Vol.2!
By yourself?
There goes 2 more birds off the face of this Earth.
The Bassani surprise snuck in at last minute from my first dyno numbers @424 RWHP. I wanted to get it to 450 by unlocking HP buy using a better pipe. I could have thrown on a smaller pulley but achieving the HP gain from the SC to 450 would be more stressful to the motor. See my logic?
I do.
That same logic is driving the carbon fiber driveshsaft, I'm getting closer to 450! I think I might gain +10 to 15 HP with the new driveshaft.
More like 'recovering'. Flywheel HP will be the same, but more of that HP will be transferred to the rear wheels.
Another free HP is the Meziere electric H2O pump, good for 11 RWHP!
... I don't know yet because they are developing it will be ready in 30-60 days.
Sure you can wait that long?
Why not just go with BMR's 1-pc carbon fiber? link
FYI.. anticipate clearance issues if you end up getting a front driveshaft loop to your MGW shifter.
Keep spanking those chickens! You die'un... I'll fry'un!
Fried Chicken? Sounds like JCC Vol.2!
Team Mustang Source
yeah it's only a bar, but I stand by my Anti-GMS stance. Sorry.
I don't have any wheel-hop so to speak either, but I'm still going with LCAs maybe it'll help cure the evil instant left turn this thing likes to do when traction is less than optimal
I don't have any wheel-hop so to speak either, but I'm still going with LCAs maybe it'll help cure the evil instant left turn this thing likes to do when traction is less than optimal
Legacy TMS Member