Ponies on The Run (Again)
2/19/07, 10:07 AM
#6181
Legacy TMS Member
Before any of you freak out, I controlled the gas and clutch and was withing reach of the steering wheel at all times. Test drive was also conducted in an empty 'Sunday' parking lot.
This is what memories are made from, for the both of us.
So, if you have anything bad to say, bite me.
This is what memories are made from, for the both of us.
So, if you have anything bad to say, bite me.
That's priceless!
Makes me want a kid and a stick
Just kidding
2/19/07, 10:16 AM
#6182
2/20/07, 08:06 AM
#6184
Sure is quiet here lately... 
Here's a vid I made from the Saleen pre-cruise 'Meet & Greet'.
http://www.youtube.com/watch?v=XXCrYPjYRXE
Here's a vid I made from the Saleen pre-cruise 'Meet & Greet'.
http://www.youtube.com/watch?v=XXCrYPjYRXE
2/20/07, 09:35 AM
#6185
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Weather is starting to look up around here. Actually got a chance to wash (not hand wash 
) my car yesterday, so she looks a TON better. Weather keeps up this weekend, CAI/Bama Tunes are going in
Got my new camera so I need to experiment and take some pics/vids.
) my car yesterday, so she looks a TON better. Weather keeps up this weekend, CAI/Bama Tunes are going in Got my new camera so I need to experiment and take some pics/vids.
2/20/07, 02:04 PM
#6186
GTR Member
Join Date: January 26, 2006
Location: Central Florida
Posts: 4,639
Likes: 0
Received 0 Likes
on
0 Posts
I'll be working on the '89 from now until March 3rd getting the lightbar and other functions working the way I want them for the two car shows. The lightbar cord used to run through the driver's side door, but I want it to run through the roof with a quick-disconnect plug (there's already a hole in the roof).
I just ordered this: 9-Function Switch Box
It'll mount right next to the siren under the dash on the passenger side. I'm not 100% sure how it will all hook up, but here are the functions I have to get wired:
5 Rotators (Lightbar)
2 Intersection lights (Lightbar)
2 Take-down Lights (Lightbar)
2 Alley Lights (Lightbar)
2 Rear Flashers (Lightbar)
Wig-Wags and Multi-Pattern (Headlights)
Traffic-Backers (Alternating brake and reverse lights)
2 Blue LED Deck Lights (16 flash patterns)
4 Corner Strobes (9 flash patterns)
Is that 9? Notice the lightbar is just as bulky and loud as it would have been back in '89. Now they are slim, mostly all LEDs, and quiet.
Gotta get movin'... only have a couple hundred feet of wire to run through the car!
I just ordered this: 9-Function Switch Box
It'll mount right next to the siren under the dash on the passenger side. I'm not 100% sure how it will all hook up, but here are the functions I have to get wired:
5 Rotators (Lightbar)
2 Intersection lights (Lightbar)
2 Take-down Lights (Lightbar)
2 Alley Lights (Lightbar)
2 Rear Flashers (Lightbar)
Wig-Wags and Multi-Pattern (Headlights)
Traffic-Backers (Alternating brake and reverse lights)
2 Blue LED Deck Lights (16 flash patterns)
4 Corner Strobes (9 flash patterns)
Is that 9? Notice the lightbar is just as bulky and loud as it would have been back in '89. Now they are slim, mostly all LEDs, and quiet.
Gotta get movin'... only have a couple hundred feet of wire to run through the car!
2/20/07, 02:10 PM
#6187
2/20/07, 02:33 PM
#6188
Found out about pioneer's new (for 2007) AVIC-D3. Priced at less than $1000 for a double din screen, iPod interfaced, CD/DVD playback, Navigation, and rear view camera input, it sounds like a winner!
Video review
Video review
2/20/07, 02:39 PM
#6189
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Found out about pioneer's new (for 2007) AVIC-D3. Priced at less than $1000 for a double din screen, iPod interfaced, CD/DVD playback, Navigation, and rear view camera input, it sounds like a winner!
Video review
Video review
Looks cool how much is it???
2/20/07, 02:51 PM
#6190
2/20/07, 03:05 PM
#6191
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
2/20/07, 06:56 PM
#6192
Bullitt Member
Join Date: June 15, 2006
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Finally got some new stuff for the hot rod. My DG Custom window louvers came in and my sequential taillights. The 1/4's were a cakewalk. As far as the taillights, the driver side went quick, but the passenger side, having to unbolt the shaker subs was a PIA for a 5 minute change. The only thing left for the exterior is the SHR trunk panel and some slotted and drilled rotors. After that it'll be time to save for the Supercharger.
2/20/07, 07:12 PM
#6193
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Finally got some new stuff for the hot rod. My DG Custom window louvers came in and my sequential taillights. The 1/4's were a cakewalk. As far as the taillights, the driver side went quick, but the passenger side, having to unbolt the shaker subs was a PIA for a 5 minute change. The only thing left for the exterior is the SHR trunk panel and some slotted and drilled rotors. After that it'll be time to save for the Supercharger.
2/20/07, 07:24 PM
#6195
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
True.
2/21/07, 06:51 AM
#6196
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Finally got some new stuff for the hot rod. My DG Custom window louvers came in and my sequential taillights. The 1/4's were a cakewalk. As far as the taillights, the driver side went quick, but the passenger side, having to unbolt the shaker subs was a PIA for a 5 minute change. The only thing left for the exterior is the SHR trunk panel and some slotted and drilled rotors. After that it'll be time to save for the Supercharger.
2/21/07, 07:53 AM
#6197
2/21/07, 10:27 AM
#6200
Got a quote from a local Mustang shop on the 4.10 gears.
The gear swap would run about 450.00 labor plus an installation kit and gears. Gears are about 230.00 and the install kit is around 75.00
It all seems pretty expensive for a little snap in the neck.
Or, will it be money well spent?
The gear swap would run about 450.00 labor plus an installation kit and gears. Gears are about 230.00 and the install kit is around 75.00
It all seems pretty expensive for a little snap in the neck.
Or, will it be money well spent?