Ponies on The Run!
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Nevermind on the a-arm. GMS is saying that regardless of how many s/h will be $15.
So I went ahead and ordered mine. Total came out to $32 which is fine as it's still $30 cheaper than BMR or CHE. If any of you are interested just call and say you saw they're $15 special on Mod Fords.
Back to the garage.....
So I went ahead and ordered mine. Total came out to $32 which is fine as it's still $30 cheaper than BMR or CHE. If any of you are interested just call and say you saw they're $15 special on Mod Fords.Back to the garage.....
Cobra Member
Joined: May 17, 2007
Posts: 1,201
Likes: 0
From: Texa$
Traction is less then optimal = burning the heck out of the rear wheels via extreme tire roasting methods employed buy one mad man named Brian
Tom, any tips on applying the Zaino Z-CS Clear Seal?
Or is it as simple as spray on the paint and wipe on with the cotton applicator, then let dry on its own.
Or is it as simple as spray on the paint and wipe on with the cotton applicator, then let dry on its own.
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Little Mustang fan get's busted.
http://forums.bradbarnett.net/showth...99#post1023299
http://forums.bradbarnett.net/showth...99#post1023299
GTR Member
Joined: January 26, 2006
Posts: 4,639
Likes: 0
From: Central Florida
Tom has been busy all day getting two cars ready for the MOSI show tomorrow. It's the show with Gold, Silver, and Bronze awards. Hopefully I'll get two Golds again... it says "new trophy style", so at least they'll be different than last year.
Yep... Just Apply and Let Dry!
Isn't that No Soup For You !! ?
Yep... Just Apply and Let Dry!
Isn't that No Soup For You !! ?
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Here we go again!
I found out that JDM Industries makes the Watts Link for Saleen. But the big diffrence is their cost $950.00 vs $1,299.00 from Saleen. It doesn't take an Einstien
to figure out this one. So I ordered two of these Hahahah! One for me and one for Charlie. I tell you it's fun making other people spend money! (I think I mastered this technique from TacoBill, TY Bill!)
(Below):
Charlie's V6 Vortec machine proud new owner of a Watts Link system
He decided to purchase the WL after he did a high speed lane change north bound on the 605 on our way to GTR. The only suprise was he didn't warn me he was going to do that little manuver. He almost broke my neck!
While at GTR I saw these wheels 4 sale. This looks like a killer deal! Plus I like the rim design...
Here's another wheel deal...
Another product from Baer brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch. Here is the rotor by itself on Gonzalo's ride:
Here is the rim and rotor on the car:
(Front)
(Rear):
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install. I'll find out exactly how much it is. They look great on the car BTW
to figure out this one. So I ordered two of these Hahahah! One for me and one for Charlie. I tell you it's fun making other people spend money! (I think I mastered this technique from TacoBill, TY Bill!)(Below):
Charlie's V6 Vortec machine proud new owner of a Watts Link system
He decided to purchase the WL after he did a high speed lane change north bound on the 605 on our way to GTR. The only suprise was he didn't warn me he was going to do that little manuver. He almost broke my neck!
While at GTR I saw these wheels 4 sale. This looks like a killer deal! Plus I like the rim design...
Here's another wheel deal...
Another product from Baer brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch. Here is the rotor by itself on Gonzalo's ride:
Here is the rim and rotor on the car:
(Front)
(Rear):
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install. I'll find out exactly how much it is. They look great on the car BTW
Shelby GT350 Member
Joined: April 9, 2007
Posts: 2,463
Likes: 0
From: Ellenton, FL
Here's another wheel deal...
Another product from Bare brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch. Here is the rotor by itself on Gonzalo's ride:
Here is the rim and rotor on the car:
(Front)
(Rear):
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install. I'll find out exactly how much it is. They look great on the car BTW
Another product from Bare brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch. Here is the rotor by itself on Gonzalo's ride:
Here is the rim and rotor on the car:
(Front)
(Rear):
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install. I'll find out exactly how much it is. They look great on the car BTW
I found out that JDM Industries makes the Watts Link for Saleen. But the big diffrence is their cost $950.00 vs $1,299.00 from Saleen. So I ordered two of these Hahahah!
Charlie's V6 Vortec machine proud new owner of a Watts Link system
Another product from Bare brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch.
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install.
Charlie's V6 Vortec machine proud new owner of a Watts Link system
Another product from Bare brakes they have a kit the uses your existing calipers and it allows you to use their rotor. I think the minimum rim size is 18 inch.
The system comes with Hawk pads and I think Gonzalo said it cost around $600 bones for all 4 wheels not including labor for install.
However all this is good news, I'm sure Leo will want to see how the WL gets installed.
Charlie is one crazy ****!
Bare Brakes a new company or typo'd Baer? I really like it though. Looks beefier and better built than my RotorPros, but mine were alot cheaper (comparing the 2, you can see why).
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Jon the kit does come with a bracket to accept the bigger rotor. I'll call Gonzalo today and get more detail. Depending on your rim there maybe clearance issues between the rim spoke and the caliper. I'll see what kind of offset you need to remedy that.
Jed
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Gu Gu
Gore here is the vid if it gets sunny today I'll shoot of engine & mod work. It's all yucky outside. On todays agenda I'm going to visit three plating companies. One in Huntington Beach and two in dowtown LA. Just doing a little research
I need to update the numbers in the vid.http://s170.photobucket.com/albums/u...=GTRDynoKB.flv
We want to see sumptin' new!
Leo and I are heading to Mission Bay, San Diego tomorrow morning for the carshow. We're entered in seperate Classes so no one is torn between our cars. 
Full report with pics by tomorrow evening (hopefully).
Good luck to Tom at MOSI!
TMS is being represented on both Coasts!
Full report with pics by tomorrow evening (hopefully).
Good luck to Tom at MOSI!
TMS is being represented on both Coasts!
Cobra R Member
Joined: May 8, 2006
Posts: 1,967
Likes: 0
From: Florida
Legacy TMS Member
Joined: July 29, 2004
Posts: 1,529
Likes: 5
From: SoCal
Leo and I are heading to Mission Bay, San Diego tomorrow morning for the carshow. We're entered in seperate Classes so no one is torn between our cars.
Full report with pics by tomorrow evening (hopefully).
Good luck to Tom at MOSI!
TMS is being represented on both Coasts!
Full report with pics by tomorrow evening (hopefully).
Good luck to Tom at MOSI!
TMS is being represented on both Coasts!
