The template's in the box. Heck why not you may might as well install it there. Bring the drill and any other tools on the install list. BTW-You'll be drilling into your decklid as well as your rear quarter panels. I can't wait I'm getting excited as if it were going on my car.

 

Oh boy... Leo's getting excited about drilling into Brian's rear decklid.

**
On a lighter note, you guys need any stuff for this project? Tape, primer, rags, etc?

 

Actually, I was noticing that...
I was thinking of trying to fill up the whole page but somebody got there first!

I was in New Jersey on business when my wife got the call that her brother in Houston was being taken off life support. So she drove to Houston while flew down there. I should have beaten her there but Delta screwed that one up.
She decided to take the stang. A trip that normally takes 10 hours at about 80 mph all the way… She won't tell me when she got here but I have gotten out of her that she was stopped twice on the way and it was for possibly +90 mph (more like 95) and didn't get ticketed. If that was me I would have been striped searched and hauled off to jail.
On the flip side she REALLY likes the stang… So much so that she is thinking of getting one! She was really impressed with how it handled and how effortlessly it accelerated when she broke out of the pack. Between that and the fact that she only stopped for fuel and could still walk when she got to Houston, so much for the rumor that the seats are uncomfortable.

 

I was in New Jersey on business when my wife got the call that her brother in Houston was being taken off life support. So she drove to Houston while flew down there. I should have beaten her there but Delta screwed that one up.
Sorry to hear that, John. Please pass our condolences to her when the time is right.


She won't tell me when she got here but I have gotten out of her that she was stopped twice on the way and it was for possibly +90 mph (more like 95) and didn't get ticketed.
Yeah, I'd lay off the Stang questions until she settles back down... or else! (I've seen my wife mad.. not pretty )


If that was me I would have been striped searched and hauled off to jail.
You aren't painting a very nice picture there, John.

 

This **** Oklahoma weather is ****ing me off. We had snow and sub-freezing temps last week, this week sunny and 70° and now tonight we have 90% chance of rain, damaging winds, hail & tornadoes.
If it calms down Sat (supposed to) I will try the CAI/Tune install. Need to get some vid with the new camera.

 

Daryl, you need to move over to SoCal, all your weather woes will be gone. Today in Long Beach, showers will be tapering off in the morning with a high of a chilly 61 degrees.

What new camera?

 

No Thank You, too many weirdos in SoCal. I mean hell look at you and Leo

This new camera.

I have been using work's camera and it was time to break down and purchase one for myself.

 

As you all know, I've been tossing the idea of the light bar back and forth since I bought the car. Here is another one not made by CDC:

http://www.aeroformstore.com/index.a...WPROD&ProdID=3

eBay link:

http://cgi.ebay.com/ebaymotors/2005-...spagenameZWD1V

Chuck (Boltzman) just installed one, so I can check it out next weekend. Here is his thread (and more pics):

http://forums.bradbarnett.net/showthread.php?t=61085

Then, would I get it red?? The piece it touches is charcoal:



EDIT: Definitely charcoal, not red.

 

Thanks Daryl. Oh, almost forgot, can you run down to the Sooner Pit Stop and pick up a new set of Billy Bob Teeth for me? Heard you guys there in OK got quite the selection!

***
Nice camera! The picture color saturation on your camera will blow away my 'Point & Shoot'.. just compare the lens size!



I like that light bar. I'd get it in whatever color the panels are (black/charcoal). Red is too much. Then, there's the issue of matching the Crimson.

 

The Mod 'bug' got me today..
Ordered : MGAW side mirror covers
CDC 3rd Brake light relocation kit
In the next day or so.
CDC Ducktail
CAI/SCT via Doug

Can't flipping wait. It's Winter in So Cal, gonna be a freezing 65 or so today

 

[quote=OKCMustangGT;850757]No Thank You, too many weirdos in SoCal. I mean hell look at you and Leo [quote]
Weirdos huh?? I'll show you weird.

Bill and his gay jokes. Not sure what Brian does or doesn't have but here's a list of tools needed:
Masking tape
Drop cloth
Hammer
Center Punch
Variable speed drill
7/16" with Socket wrench and extension
3/16" allen wrench
1/8,5/16, and 1/2 drill bits
or
#3 & #10 unibits
Rubbing alcohol

One more important thing make sure you wash you rear before tomorrow.
Bring some "quick detail spray" to do a final wipe down before using the rubbing alcohol.

Congrats. So you still haven't answered my question about wether or not you plan on a chin spoiler.

 

The ONE time you get my name right and not typing Brain.... LOL

1. Car washing supplies check
2. Masking tape check
3. Drop cloth no
4. Hammer check
5. Center punch no
6. Variable speed drill check
7. 7/16" Socket wrench with extension check
8. 3/16" Allen wrench ?? have to check but I think so.
9. 1/8", 5/16" and 1/2" Drill bits ?? most likely I have these
or
(9). #3 and #10 Unibits don't have unibits
10. Rubbing (Isopropyl) alcohol nope

 

Tom, when I first saw the light bars I would have said Red all the way, but after seeing that one with the red interior, I would definitely say Black/Charcoal
I really like the look of the light bars on these verts.

 

I think charcoal, too. I'll still wait to see Chuck's this coming weekend before ordering, though.

 

Thanks Daryl. Oh, almost forgot, can you run down to the Sooner Pit Stop and pick up a new set of Billy Bob Teeth for me? Heard you guys there in OK got quite the selection!
Just let me know which set you want. If really interested I can probably find you a girl with REAL Billy Bob Teeth.
***
Nice camera! The picture color saturation on your camera will blow away my 'Point & Shoot'.. just compare the lens size!
So what you are saying is mine is BIGGER and size DOES matter

 

Will wash the deck lid just for you....
I've got Zaino and Meguiars quick detail in the truck so that will be no problem.

I will get a chin spoiler and planned on getting it before the ducktail but this deal hit me first. With the C&L, ducktail and a couple other things on order this is all I can do for this go-around. The Chin spoiler, maybe the pre-painted one, will be next and a window Tint.
That will take care of my external mods for the most part. Unless I get stripes. Then again I may just pull the trigger and be the guinea pig for the Steeda UDPs next instead.

So may options, so little money.

 

+1 I have only seen the charcoal/black light bars and I'm not sure red would go well.

 

Not sure what Brian does...
We all wonder that. I think we can conclude that not much work is being done.


One more important thing make sure you wash you rear before tomorrow.
No comment.



I have all the 'no's' and ??, except #9? What's a Unibit? Just have to work out a time frame for all 3 of us to be there.

Sorry about the name, I always do that! I have the same problem with teh (the).



That goes without saying! Especially if one's available for you see in person.

 

Thanks Daryl. Oh, almost forgot, can you run down to the Sooner Pit Stop and pick up a new set of Billy Bob Teeth for me? Heard you guys there in OK got quite the selection!
Just let me know which set you want. If really interested I can probably find you a girl with REAL Billy Bob Teeth.
Hey! Leave yur sis out of this!
btw- Don't use the RED font color, that's reserved for me.

***

Nice camera! The picture color saturation on your camera will blow away my 'Point & Shoot'.. just compare the lens size!
So what you are saying is mine is BIGGER and size DOES matter
In the Canon vs Sony lens, yes. Wise guy.

 

AKA Step Drill Bit
Attachment 20168