Fastest Times and Highest HP
#62
Just got back from the track last night.... Making around 295-300rwhp. Car hasn't been dyno'd and is running on a can tune from Brenspeed.
Reaction: .8431
60': 2.1088
330': 5.8419
1/8": 8.8458
MPH: 82.60
1000': 11.4108
1/4: 13.5810
MPH: 104.11
Reaction: .8431
60': 2.1088
330': 5.8419
1/8": 8.8458
MPH: 82.60
1000': 11.4108
1/4: 13.5810
MPH: 104.11
#63
Member
Join Date: September 4, 2010
Location: Waukegan, Illinois
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Ran at Great Lakes Dragaway a couple of weeks ago. Temps. finally got in the mid to low 70s. Car is stock down to the paper air filter and stock factory tune. Only options are factory 3.73 gears w/manual trans and dual piston front brake calipers.
R/T: .294
60': 2.102
330': 5.731
1/8 mile: 8.736
MPH: 82.42
1000': 11.311
1/4: 13.489
MPH: 103.04
R/T: .294
60': 2.102
330': 5.731
1/8 mile: 8.736
MPH: 82.42
1000': 11.311
1/4: 13.489
MPH: 103.04
#67
Here's my 1993 Ford Mustang 5.0 LX. It has run a best of 10.741 @130.18 N/A and 9.126 @152.44 w/a 300 shot of nitrous.Here's my dyno sheet and engine build on my blog.http://www.bestracingtips.com/power-...racing-engine/
Tommy
Tommy
#68
#69
Hows it going guys and girls. Im new to the site and dont know much abour forums so dont know how to start my own thread lol. But I drive a tungstan grey 2006 gt. Got her for my 18th. She has pype bombs and a jtl cai and sct tuner on the way, unfortunately on back order and have 5% tint all the way around.
#73
Scotthew
I'm a newbee and am not sure how to use the sight. I posted a thread a few days ago and got 122 replies but I can't fugure out how to read the replies. I am not sure how to post a new thread. I did it the first time and have not been able to do it since. I'm trying to get info on 1972 and 73 mustnag coupe grande's specifically how many in specific color combination where manufactured and if possible where they where shipped. I'm trying to locate a car I owned 30 years ago. any help on these questions would be greatly appreciated. Thanks
I'm a newbee and am not sure how to use the sight. I posted a thread a few days ago and got 122 replies but I can't fugure out how to read the replies. I am not sure how to post a new thread. I did it the first time and have not been able to do it since. I'm trying to get info on 1972 and 73 mustnag coupe grande's specifically how many in specific color combination where manufactured and if possible where they where shipped. I'm trying to locate a car I owned 30 years ago. any help on these questions would be greatly appreciated. Thanks
#74
Member
Join Date: August 31, 2011
Location: Dallas, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
2012 Boss 302 (stock)
6 speed manual
Dynojet at Dallas Mustang Parts (9/15/2011)
Max HP: 375.68 @ 6600 rpm
Max Torque: 337.91 @ 4600 rpm
Best of 3 pulls in 5th gear
Temp: 82f
Humidity: 20%
6 speed manual
Dynojet at Dallas Mustang Parts (9/15/2011)
Max HP: 375.68 @ 6600 rpm
Max Torque: 337.91 @ 4600 rpm
Best of 3 pulls in 5th gear
Temp: 82f
Humidity: 20%
#80
Member
Join Date: March 4, 2012
Location: Portland, OR
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
1985 SVO
ET 13.33 @ 103 with 2.0 60ft
Mods:
K&N air filter
Front mount intercooler
60mm Supercoupe throttle body
Ported and gutted intakes
stock head, cam, and exhaust manifold
stock t3 turbo with .48 turbine housing and .60 compressor housing
3" downpipe through 3" exhaust to a 3" Dynomax bullitt
Alcohol injection systems stage 1 water/meth kit
No dyno numbers
Mods since 13.33
Ported and polished head with big valves
Ranger roller cam
Ported E6 manifold
Hoping for 12s next time out.
All work done by me.
Jason
ET 13.33 @ 103 with 2.0 60ft
Mods:
K&N air filter
Front mount intercooler
60mm Supercoupe throttle body
Ported and gutted intakes
stock head, cam, and exhaust manifold
stock t3 turbo with .48 turbine housing and .60 compressor housing
3" downpipe through 3" exhaust to a 3" Dynomax bullitt
Alcohol injection systems stage 1 water/meth kit
No dyno numbers
Mods since 13.33
Ported and polished head with big valves
Ranger roller cam
Ported E6 manifold
Hoping for 12s next time out.
All work done by me.
Jason