Midwest TMS'ers General Communication Thread
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
Took off my other set of Valve Covers tonight and changed spark plugs. No major problems. Got my big can of Nickle Anti-seize today from ebay (20 bucks). Going to bead blast several mo parts this weekend. Drop a small bolt with the Valve covers off. Found it with a magnet and I hoping there was not another 1. Took 3 different size magnets though both heads and blew air from a wand off my air compressor. I think nothing else is in there..
Hey Scottie should have got the D-specs.
Hey Scottie should have got the D-specs.
Last edited by dly; 2/19/10 at 03:20 AM.
Legacy TMS Member
Thread Starter
Took off my other set of Valve Covers tonight and changed spark plugs. No major problems. Got my big can of Nickle Anti-seize today from ebay (20 bucks). Going to bead blast several mo parts this weekend. Drop a small bolt with the Valve covers off. Found it with a magnet and I hoping there was other 1. Took 3 different size magnets though both heads and blew air from a wand off my air compressor. I think nothing else is in there..
Moving to Ohio ain't worth it!
Legacy TMS Member
Legacy TMS Member
Thread Starter
Hi Cody! To be honest, I don't know what the heck I'm going to do. I may just keep the Mach and turn it into a street machine, then get a used '11 on a couple of years.
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
Took off my other set of Valve Covers tonight and changed spark plugs. No major problems. Got my big can of Nickle Anti-seize today from ebay (20 bucks). Going to bead blast several mo parts this weekend. Drop a small bolt with the Valve covers off. Found it with a magnet and I hoping there was not another 1. Took 3 different size magnets though both heads and blew air from a wand off my air compressor. I think nothing else is in there..
Hey Scottie should have got the D-specs.
Hey Scottie should have got the D-specs.
Legacy TMS Member
All the time. When I go to the track and I set them hard for every day use until the wifey starts to complane about the hard ride than I soften them up until she stops whining.
BoogieNights Studios:
Official Fluffer
Official Fluffer
Join Date: September 13, 2009
Location: Clarksville, TN
Posts: 5,520
Likes: 0
Received 5 Likes
on
5 Posts
Engine turns clockwise. I think. Or maybe it turns counter-clockwise. hmmm i gotta think on it.
Seriously if you are standing at the front of the car looking at the engine it turns clockwise. if you are sitting in the drivers seat it is turning counter-clockwise.
Seriously if you are standing at the front of the car looking at the engine it turns clockwise. if you are sitting in the drivers seat it is turning counter-clockwise.
Last edited by BoogieNights; 2/19/10 at 03:03 PM.
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
I thought a guy that has D-specs would know this If your going to hand crank it I would assume you are going to be in front of the car. Than engine rotation is clockwise (from the front) which for you guys in Indiana is too your right!!! Do you know your right?? That's the hand you pick your nose with!! But really the engine turns counterclockwise because everything in a car or plane is taken as if your sitting the operators seat!! Does that make sense? Who's on second??? I thought you found the missing bolt.
Last edited by 70MACH1OWNER; 2/19/10 at 03:58 PM.