"White" setting for MyColor
"White" setting for MyColor
I've read in previous posts that many of you were disappointed in the preprogrammed "White" MyColor setting. The white is dingy and dirty looking and some of you said you wish there was a way to get the same white color that the gauges are when the headlights are off. Well tonight, I was playing around with the settings and came up with a solution.
Instead of using Ford's preprogrammed "White" MyColor setting, go to the custom screen and use the following settings for Red, Green and Blue:
R5 G5 B2
Once you have it saved, turn off the headlights and back on again. You will only notice a slight difference in the gauge brightness between when the headlights are off and when they're on. This is about as close as you can get to when the headlights are off. It actually looks pretty sweet at night, although blue is still my favorite.
Enjoy!!!
Instead of using Ford's preprogrammed "White" MyColor setting, go to the custom screen and use the following settings for Red, Green and Blue:
R5 G5 B2
Once you have it saved, turn off the headlights and back on again. You will only notice a slight difference in the gauge brightness between when the headlights are off and when they're on. This is about as close as you can get to when the headlights are off. It actually looks pretty sweet at night, although blue is still my favorite.
Enjoy!!!
552 is yellow on this chart: http://home.surfree.com/~pauld/mustang.htm
552 is yellow on this chart: http://home.surfree.com/~pauld/mustang.htm
It's great for blue, purple, and green.
I usually just leave it at green now.
Red, blue, green and purple really pop on mine, especially at night...
I did do white for a while, but found myself leaving the lights on or not turning them on since the color was the same as when they're off... LOL! My car would yell at me when I would leave the lights on as I was getting out of the car... So, I switched back to green... Green is the color I use most often as well...
I did do white for a while, but found myself leaving the lights on or not turning them on since the color was the same as when they're off... LOL! My car would yell at me when I would leave the lights on as I was getting out of the car... So, I switched back to green... Green is the color I use most often as well...
I drove my dads car the other day, and I have found that it is easy to accidently forget to turn on the lights becuase the dash lights come on at startup. With my car, I cant forget becuase at night, I cant see my guages unless the lights are on.....
if you turn your mycolor settings to white, it would only make this problem even worse. At least I can always remind myself that... "unless the dash is blue, the lights are off."
if you turn your mycolor settings to white, it would only make this problem even worse. At least I can always remind myself that... "unless the dash is blue, the lights are off."
Blue is 2 notches too stong!
(but I'll admit.. I do use green a lot b/c it blends with the dash)
Thread
Thread Starter
Forum
Replies
Last Post
austin101385
'10-14 Shelby Mustangs
3
Oct 2, 2015 01:00 PM




