Tire pressure monitor
#21
Mach 1 Member
Thread Starter
Join Date: April 16, 2004
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
Are we limited to going to the dealer for tire rotation and new tires?
I know now when I go to America's tire I'm paying something like $3 or $4 per stem. Are these are reusable or are we going to be stuck paying something like $16 per stem?
I know now when I go to America's tire I'm paying something like $3 or $4 per stem. Are these are reusable or are we going to be stuck paying something like $16 per stem?
#24
Legacy TMS Member
I would'a thought they might have used a piezo(sic) electric generator? but in 7 to 10 years the aftermarket should be rife with reman pressure moniters.
Yes they could be used with EMT's, but you dont want to. EMT's at the very least have a much stiffer sidewall (unless its Michelin's PAX system) so it wipes the ride out, also EMT's may be heavier. which is a no no when it comes to upsprung weight.
Also funny thing about plain old rubber valvestems. they are only 15 to 25 cent per stem. A bulk box runs like 90 bucks for 500. Now figure the actual labor time invovled installing a valvestem. Its like 10 seconds MAX! so lets see, 25 cents for the stem, okay 50 cents for a stem @ 100 % profit and 2.50 per 10 seconds of labor.... so .... ..... Amazing 900.00 bucks an hour to install a 25 cent stem.
and when I say installed, I mean valvestem hole lubed, valvestem lubed and inserted by hand and drawn through with a puller.
Yes they could be used with EMT's, but you dont want to. EMT's at the very least have a much stiffer sidewall (unless its Michelin's PAX system) so it wipes the ride out, also EMT's may be heavier. which is a no no when it comes to upsprung weight.
Also funny thing about plain old rubber valvestems. they are only 15 to 25 cent per stem. A bulk box runs like 90 bucks for 500. Now figure the actual labor time invovled installing a valvestem. Its like 10 seconds MAX! so lets see, 25 cents for the stem, okay 50 cents for a stem @ 100 % profit and 2.50 per 10 seconds of labor.... so .... ..... Amazing 900.00 bucks an hour to install a 25 cent stem.
and when I say installed, I mean valvestem hole lubed, valvestem lubed and inserted by hand and drawn through with a puller.
Thread
Thread Starter
Forum
Replies
Last Post
Rando
2010-2014 Mustang
8
8/25/21 11:12 AM