Stillen Sportsparts wants to hear from you
#82
Team Mustang Source Legacy Member
Did you guys ever try the "MeanStreak" marking stick by Sanford?
http://forums.bradbarnett.net/showpo...2&postcount=80
I've been thinking about trying it, but I'm not really going for the old school look.
http://forums.bradbarnett.net/showpo...2&postcount=80
I've been thinking about trying it, but I'm not really going for the old school look.
#84
Team Mustang Source Legacy Member
I never have any problems with it at work. But of course I've never tried it on tires. I only use yellow otherwise I would've tried at least one letter to see how long it stays on.
#85
Any more news on the mirrors? Aren't all our cars power mirrors? So how would these mirrors really benefit us if they don't plug and play? Unless you went with manual and have a dead **** in the car(ghetto).
#86
Authorized Advertiser
Thread Starter
Join Date: September 6, 2006
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
555 - I haven’t forgotten about you. I cannot find a mirror that will fit your exact application. However, if you decided to do a conversion with an electric mirror, it will utilize the factory connector, but you will still have to splice in to use the rear signal feature. I hope this answers your question. If not then please give me a call at 800-858-0534 so that we can discuss this further.
#88
#90
I am pretty sure Cobra R hoods are already out for our cars. I saw a post on mustangforums.com about them and some others. As far as the mirrors, a little toooo retro for my tastes. Maybe if our stock mirrors were mounted off the side of the doors then it would look pretty good but that looks goofy.
#91
Team Mustang Source Legacy Member
#92
GTR Member
#94
A plain matte black rear blackout panel that doesn't have the provision for the emblem. CDC has one but it's got some goofy horizontal lines in it. No honeycomb, no lines, no emblem etc... I can't believe that nobody has made such a simple piece yet. Without all the extra design, you should be able to build a piece that is easier to manufacture and is less expensive than the competition.
Please...
Please...
Oh God yes, please do this, I need one!!
#95
GTR Member
Well 555 said 3d carbon already makes one and I'm assuming he would have to know that since he's always logged in and posting big #'s.so by method of elimination I concluded in my exhausting studies that he must be talking about 68..If not then I really don't know
#97
Team Mustang Source
#98
Authorized Advertiser
Thread Starter
Join Date: September 6, 2006
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
#99
#100
Team Mustang Source Legacy Member