Anyone using these?
If so, do yours make noises over bumps in the road?
Are all C/C plates noisy?
I am about ready to put the stock stuff back in.
Any feedback is appreciated.

 

Haven't had a problem with Steeda caster/camber kit.

 

I have ground control plates and they are very quiet.

 

After talking to American Muscle, and completely disassembling one side, I found that the "joint" is sort of an inside-out hiem joint. I also noted it has about an 1/8" end play...not good, and definitely the cause of the noise.
Long story shortened, AM is sending me a set of Maximum Motorsports CC plates, at no extra charge...Kudo's to American Muscle!!!

 

 

MMR CC plates on and in perfect working order.
One of the good things about wrenching on your own cars for the last 38 years is, the alignment shop didn't touch the drivers side, and only had to massage the passenger side 2 tenths of a degree to get the camber where I wanted it...caster was perfect both sides...toe was a different story...:/

 

Glad to hear you are enjoying your American Made Caster/Camber kit from Steeda ...

Best Regards,

TJ